FPC Flex Durability Tester
Technical parameters:
1. Test station :1
2, test Angle: 10-180 degrees （touch screen digital setting）
3, test speed :10-120 times/min （touch screen digital setting; Stepper motor 60 times limit speed; Servo motor maximum limit speed of 120 times）
4, test stroke: 15-100mm （manual adjustable）
5, the test fixture maximum width and opening width :80mm
6. Test fixture: a set of lower end moving fixture and upper end moving fixture
7, the number of test counter :0——999999 times （touch screen digital can be preset, reach the number and product break automatically stop）
8, test function: touch screen set Angle, times, speed, etc., with a unique conduction function, disconnect automatically stop counting function, automatically find the origin and other functions
9, machine size （L×W×H） :450×380×700mm
10, machine weight: about 45kg
11. Working power supply :AC220V, 50HZ
Product features:
1, the stepper motor drive, high-precision positioning, low noise, can be used for a long time
2, program-controlled origin reset, no need to hand the fixture to the original position
3, the touch screen display controller for program input
4, the test Angle, speed, test times, and motor return to the origin can be set, automatic counting, product bending to the broken line can not be powered on, and can automatically stop operation
Send product request
Other supplier products
 |
Anti Synthetic blood penetration tester | Standards: ASTM F1670； ASTM F1671； ASTM F903； ISO 16603； ISO 16604； GB 19082； YY/T 0689； YY/T 0700； Applications: It is applicable to the ... |
 |
Plastic ball indentation hardness tester | Meet the standard: ISO 2039-1 Product Introduction: The hardness of plastics is a fundamental property that influences their performance, dura... |
 |
Battery impact tester | Product introduction The test sample cell is placed on a flat surface with a 15.8±0.2mm（5/8 in） diameter rod placed in a cross position ... |
 |
Intervertebral Fusion Cages Shear Fatigue Tester | Standard YY/T 0959-2014 (China): Specifies shear fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency, ... |
 |
Scorch Tester Sublimation fastness tester | In the daily process of shaping and high temperature ironing, dyes heat stability will affect the appearance of fabrics.. Dyes heating , heat trans... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
