Nonwovens Synthetic Blood Penetration Tester
Introduction:
Synthetic Blood Penetration Resistance Tester is developed for ranking the synthetic blood penetration resistance performance of medical face masks in a manner representing actual use as might occur when the face mask is contacted by a high velocity stream of blood from the punctured wound.
This test is required by ASTM F2100 and is tested in compliance with ASTM F1862. ASTM F2100. EN 14683. and ISO 26609.
Applicable Standards：
ASTM F1670;
ASTM F1671;
ASTM F903;
ISO 16603;
ISO 16604;
GB 19082;
YY/T 0689;
YY/T 0700;
Synthetic Blood Penetration Testerworking principle:
Under constant pressure, the synthetic blood was tested on the protective clothing material, and the penetration of blood was synthesized on the visual inspection material.
Sample preparation:
In the sample of each protective suit, 3 pieces (75*75) mm are randomly selected. When conducting the experiment on the composite or multi-layer materials, the edges should be sealed and the diameter shoud be kepted greater than 57mm for testing.
Instrument characteristics:
1. The instrument adopts the air source which can provide (0.5---30 + 0.1)kPa pressure to continuously pressurize the sample, and is not subject to the space limitation of the test site;
2. The range of air pressure can be set freely and set range (0.5---30)kPa;
3. Color touch screen display, Chinese and English operation menu, user can freely choose the language operation;
4. The sample surface is made of imported special aluminum profiles, with light material, smooth surface and never rust;
5. The instrument adopts imported special aluminum drawing panel with metal buttons;
6. The instrument is equipped with a sample automatic clamping device without manual clamping;
7. The test tank is equipped with special fixed device to facilitate customer operation;
Send product request
Other supplier products
 |
Paper thickness tester | Paper thickness tester - Other test instrument - standard Product Introduction: Paper thickness tester is suitable for measuring the thickness of... |
 |
Steel wheel wear testing machine | Meet the standard: GB/T3810.7-2016 "Wear resistance test method for unglazed brick" ISO/DIS10545/6-94 "Unglazed brick resistance to deep wear tes... |
 |
Intramedullary Nails Four - point Bending Fatigue Tester | Standard YY/T 0591-2011: Chinese standard specifying bending fatigue test methods for intramedullary nails and locking screws, including load ap... |
 |
Protective Clothing Against Acid and Alkali Tester BS EN 463-1995 ISO 6529-2013 | Standards: GB 24540-2009《protective clothing against liquid acids and alkalis 》Appendix D ISO 6529-2013 Protective clothing-protection against che... |
 |
Respiratory Resistance Tester | Respiratory Resistance Tester Introduction: The respiratory resistance tester is used to determine the inspiratory and expiratory resistance of re... |
Same products
 |
KL‑016A Benchtop High‑precision pH Meter | Seller: Kelilong Electron Co.Ltd | Product Description: Large‑screen display with high resolution and precision for con... |
 |
Large Naïve VHH Library | Seller: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester | Seller: Kelilong Electron Co.,Ltd | Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent... |
 |
ORP-2026S Waterproof Soil ORP and Temperature Meter | Seller: Kelilong Electron Co.,Ltd | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
TDS-2616 Waterproof EC/TDS/Temperature Meter | Seller: Kelilong Electron Co.,Ltd | Range EC ～19.9mS TDS Temp 0～50℃ R... |
