Water Vapor Permeability Tester

This instrument is professionally applicable to the determination of water vapor transmission rate of plastic films, composite films, high barrier materials, back-sheets, sheeting, aluminum foils, waterproof materials, and other materials used in sanitary and medical industry.

By testing the water vapor transmission rate, the technical indexes of materials could be controlled to meet the requirements for production.

Features

1. The system is controlled by micro-computer with LCD, menu interface and PVC operation panel, which could conveniently export test data, test results and test curves
2. Wide range and high-precision of automatic temperature control to support combinations of non-standard test conditions
3. The system could be extended for the water vapor transmission rate test of finished package containers by special customization
4. Reference film for fast calibration to ensure the accurate and universal test data
5. Equipped with micro-printer and RS232 port for convenient data transfer
6. Supports LystemTMLab Data Sharing System for uniform management of test results and test reports

Principle

Under a certain test temperature, a constant humidity difference is generated between two sides of the test specimen. The water vapor permeates through the specimen into the dry side and then is taken to the sensor, where proportional electric signals will be generated. The water vapor transmission rate and other parameters can be obtained by analyzing and calculating these electrical signals.

Standards

This test instrument conforms to the following standards:

ISO 15106-3. GB/T 21529. DIN 53122-2. YBB 00092003

Applications

This instrument is applicable to the determination of water vapor transmission rate of:

Basic Applications

• Film

Including plastic film, plastic composite film, paper-plastic composite film, co-extruded film, aluminized film, aluminum foil, aluminum foil composite film, and many other films.

• Sheets

Includes engineering plastics, rubber and construction materials such as PP, PVC and PVDC.

• Paper and cardboard

Includes paper and cardboard, such as aluminum foil for cigarette packaging and Tetra Pak materials

• Packaging

Includes plastics, rubber, paper, paper-plastic composites, glass and metal packaging, such as Coke bottles, Tetra Pak materials, vacuum bags, metal three-piece cans, cosmetic and toothpaste tube packaging, and jelly cups.

Technical Specifications

Specifications	Film Test
Test Range	0.001 ~ 50 g/m2·24h (standard) 0.01 ~ 1000 g/m2·24h (optional)
Number of Specimens	1
Resolution	0.1ppm
Temperature Range	5°C ~ 95°C
Temperature Accuracy	±0.1°C
Humidity Range	0%RH, 2%RH ~ 98.5%RH, 100%RH (standard is 90%RH)
Accuracy	±1%RH
Test Area	38.48 cm2
Thickness	< 1 mm (accessories required for thicker specimens)
Specimen Size	Φ100 mm
Carrier Gas	99.999% High Purity Nitrogen (outside of supply scope)
Gas Flow	100 mL/min
Gas Supply Pressure	≥ 0.12 MPas
Port Size	1/8 inch copper tubing
Instrument Dimension	500 mm (L) x 400 mm (W) x 360 mm (H)
Power Supply	220VAC 50Hz / 120VAC 60Hz
Net Weight	36 kg

Configurations

Standard Configurations

Instrument, Micro-printer, Constant Temperature Control Device, Precision Pressure Regulator for Nitrogen Cylinder, Porous Ceramic Tray, Desiccant, Round Sample Cutter and Vacuum Grease

Optional Parts

Professional Software and Communication Cable

Note

1. The gas supply port of the instrument is 1/8 inch copper tubing;

2. Customers will need to prepare for gas supply, distilled water, and salt reagent.

Other supplier products

	Anti Synthetic blood penetration tester ISO 22609 YY 0469-2011	Standards: GB 19083-2010 Technical requirements of medical face masks - Anti-penetration property of 5.5 synthetic blood. YY/T 0691-2008 Clothing ...
	Diesel Water Ash Sulfur Mixing Tester	Meet the standard: ASTM D6304 ASTM D1744 ASTM D95 ASTM D482 ASTM D2622 ASTM D5453 ASTM D1266 Product Introduction: Analysis of water, ash, ...
	Wet leakage current test system of photovoltaic module	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovol...
	Vehicle Cabin Air Filter Tester	Applicable standards: DIN 71460-1 Road vehicles - Air filters for passenger compartments of motor vehicles - Part 1: particulate matter filtration...
	Pipes Hydrostatic Testing Machine	Standard ISO 1167: For thermoplastics pipe systems under constant internal pressure. ASTM D 1598: Standard test method for time-to-failure of pla...

All supplier products

Same products

	pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester	Seller: Kelilong Electron Co.,Ltd	Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent...
	ORP-2026S Waterproof Soil ORP and Temperature Meter	Seller: Kelilong Electron Co.,Ltd	范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV...
	TDS-2616 Waterproof EC/TDS/Temperature Meter	Seller: Kelilong Electron Co.,Ltd	Range EC ～19.9mS TDS Temp 0～50℃ R...
	EC-98330 CF ECOstick - Nutrient Tester	Seller: Kelilong Electron Co.,Ltd	Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el...
	PH-808 Waterproof Soil PH Meter	Seller: Kelilong Electron Co.,Ltd	Model PH-808 Range PH ～14.00PH Temp 0～50℃ ...