ICI Mace Snag Tester

• 

Introduction
ICI Mace Snag Tester is suitable for the snagging performance test of knitted fabrics and woven fabrics in outwear as well as other fabrics easy to snag , especially for chemical fiber filament yarn and its deformation yarn products. It can quickly detect the fabric snagging tendency under normal wearing condition (namely snagging the yarn out from the fabric).

The instrument is equipped with an observation box and the comparison pattern card with different fabric structure. It is equipped with four test rolls ( for putting on the fabric to be tested). The mace ball is a tungsten carbide head and is controlled by a predetermined electronic counter.

Working Principle
The cylindrical specimen is placed on the revolving drum, and a chained hammer is placed on the surface of the specimen. When the drum rotates at a constant speed, the nail hammer makes random flip and bounces on the sample surface to hook the sample. The sample surface produces snagging. After the specified number of revolutions, compare with the comparison snag Lattuca for snag rating.

Standards
ASTM D3939 Standard Test Method for Snagging Resistance of Fabrics (Mace Test Method)
GB/T 11047 Textiles-Determination of fabrics snagging resistance-Mace test method
JIS L1058Test methods for snag of woven fabrics and knitted fabrics

Technical Parameters
·Specimen size: 220mm×330mm;
·Revolving drum diameter: 82mm;
·Revolving drum length: 210mm;
·Mace ball: Tungsten carbide head;
·Mace diameter : 31.8 mm;
·Mace height:135g;
·Mace protruding length: 9.5 mm;
·Mace plant needles: 11 tungsten needles;
·Needle exposed length: 10mm;
·Tip radius: R0.13mm;
·Guide bar working width: 125mm;
·Distance between the hammer and the guide bar：45mm;
·Stations: 4;
·Test speed: 60rpm;
·External dimension: 1007×508×405mm(L×W×H);
·Weight: about 90kg;
·Power supply: 1∮ ，AC220V，50Hz，3A

Accessories
·Snag rating box
·Tungsten carbide crochet hook (12pcs/bag)
·Felt jacket (4pcs/bag)
·Comparison snag Lattuca

Other supplier products

	Sweating Guarded Hotplate	Sweating Guarded Hotplate is also called Thermal resistance wet resistance tester Testing Standards:GB/T 11048, ISO 11092, ASTM F1868, ASTM D151...
	Textile Fabric Steam Shrinkage Tester	Testing Standards: ISO 3005, BS 4323, NEXT TM 15, M&S P8, IWTO 29-76 Application: This instrument is suitable for woven fabrics and knit...
	Drying Rate Tester	A Drying Rate Tester is an instrument used to precisely measure how quickly a material dries under controlled environmental conditions. It quantifi...
	Martindale Abrasion And Pilling Tester	Martindale Abrasion And Pilling Tester Martindale Abrasion & Pilling Tester. To determine the abrasion and pilling resistance of all kinds...
	Digital Fabric Elmendorf Tearing Strength Tester	Tearing TesterFurther Details: The Tearing Strength of fabrics, Paper, Plastic Film, or other comparable materials in sheet structure is controlle...

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...