Helmet Surface Protrusion Shear and Friction Tester/ helmet surface friction testing machine/ Helmet surface protrusion shear tester
In the realm of protective headgear, a helmet's primary role is to absorb and deflect impact forces to safeguard the wearer's head. However, the external surface of a helmet plays a crucial, yet often overlooked, role in rotational injury prevention. When a helmet strikes a surface at an angle, any protrusions or high-friction areas on its exterior can create rotational forces that transmit harmful shear and torsion to the head and brain. This is precisely why the Helmet Surface Protrusion Shear and Friction Tester is an indispensable tool in modern helmet safety assessment.
Purpose
The Shear Force and Friction Tester for Helmet Surface Protrusions is mainly used to test the shear force and friction performance of the protrusion structures on the helmet surface.
Main Uses
Produced according to helmet related standards, it is mainly used to test the shear force and friction performance of the surface raised structure of motorcycle helmets and electric vehicle helmets. Widely used in various helmets related production, scientific research, quality supervision and testing units.
Main features
1. PLC touch screen control.
2. Horizontally oriented carrier with exchangeable installation of sandpaper and cutter.
3、Head type can be rotated 360.
4、Equipped with professional speed measuring tooling.
Main indicators
1. friction sandpaper: 300mm-303mm long, grade 80 aluminum oxide coated sandpaper.
2. steel cutter: 6mm high, 25mm wide, the top edge of the cutter is chamfered with a radius of 1mm.
3、Impact weight: 15kg-15.5kg
4、Weight fall height: 0-1000mm.
5、Pre-loaded weight: 400N-410N.
6、Sensor range: 0-120mm.
7、Power supply of the instrument: 220V 50Hz.
Applicable standards
GB811. ECE R22.05
Send product request
Other supplier products
 |
KK03 Scratch tester | Product Introduction: With the continuous expansion of the use of plastic molding products, from the point of view of the surface appearance of mo... |
 |
Molten Metal Splash Impact Tester | Product Introduction： Projections of molten metal drops at a point on a vertical oriented test specimen and measurement of the number of the drops... |
 |
Leather Water Vapor Permeability Tester | Standards: UNI EN IUP/15, UNI EN 13515, EN ISO 20344: 6.6, IUP 15, BS 3144 Method 24, SLP 25，DIN 53333, ISO 17699, DIN 53 429, METODO - 309 WI 009... |
 |
Nissan 4-Station Abrasion Tester for Multi-Material Durability Tester | Standard ASTM D3884(Standard Guide for Abrasion Resistance of Textile Fabrics) ISO 5470-1(Rubber- or Plastics-Coated Fabrics - Abrasion Resistanc... |
 |
Digital Autoburst Strength Tester | Standards: ASTM D3786, ERT 80-4-20, GB/T 7742.1, BS EN ISO 13938-1, BS 3424-6-B, ISO 3303-B, ISO 2758, ISO 3303.2, ISO 3689, JIS L1018,L1093, IW... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
