.

Mechanical load testing machine for photovoltaic modules

Standard

  • IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
  • IEC 61646: Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
  • IEC 62782: Dynamic Mechanical Load Testing for Photovoltaic Modules
  • UL 1703: Flat-Plate Photovoltaic Modules and Panels
  • CE Certification(Conformité Européenne)

Product Advantages

  1. Multi-Standard Compliance
    • 5,400 Pa Forward / 2,400 Pa Reverse Loading: Replicates snow/wind loads per IEC 62782.
    • 1,000 Pa Dynamic Testing: 1,000-cycle fatigue simulation for hail/debris impact.
  2. Ultra-Precise Control
    • 0.1N Force Feedback: Low-friction cylinder ensures ±5% pressure accuracy.
    • 7+3s Cycle Timing: Mimics real-world pulsating wind loads.
  3. Automated Testing
    • Programmable Cycle Count: 1–99,999 cycles with auto-stop at failure.
    • AI-Powered Failure Detection: Real-time EL imaging correlation for crack analysis.
  4. Safety First
    • Emergency Shutoff: Dual redundant safety circuits with load cell override.
    • Overload Protection: 6,000 Pa max pressure cutoff.
  5. Modular Design
    • Quick-Change Fixtures: Adapts to framed, frameless, and flexible PV modules.
    • Expandable Test Area: Up to 3.0m × 2.0m for large-format modules.

Product Features

  • Dual-Mode Operation: Static/dynamic load testing with auto-switching.
  • 10” Touchscreen HMI: Preloaded IEC/UL test sequences with customizable pressure profiles.
  • Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for failures.
  • Self-Calibrating System: Auto-tare and linearity checks before each test.
  • Rust-Resistant Frame:304 stainless steel construction with epoxy coating.

Technical Parameters

ParameterSpecification
Test Area 2.8m (L) × 1.8m (D) × 1.95m (H)
Forward Load 5,400 Pa (adjustable)
Reverse Load 2,400 Pa (adjustable)
Dynamic Load 1,000 Pa, 1,000 cycles (7s+3s timing)
Pressure Accuracy ±5% of setpoint
Force Sensor 0.1N resolution, 10 kN capacity
Power Supply 230V AC, 50/60Hz (single-phase)
Air Supply 6–8 bar (clean/dry air required)
Weight 1,200 kg (net) / 1,500 kg (gross)

Accessories Included

  1. Testing Kit:
    • 4x PV module clamping fixtures (adjustable for 16–40 mm frames).
    • 10x load distribution pads (anti-skid rubber).
  2. Software Suite:
    • License key forLoadTest Pro(Windows/Linux).
    • 1-year free access to cloud-based fatigue analysis tools.
  3. Calibration & Safety:
    • NIST-traceable pressure gauge.
    • Safety harness kit for large modules.
  4. Maintenance Kit:
    • Spare O-rings and cylinder seals.
    • Machine cleaning solution (non-corrosive).
  5. Documentation:
    • Multilingual quick-start guide (printed + digital).
    • Compliance certificates for IEC/UL/ISO standards.


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Toilet Corrosion Test Chamber (HCl and Ammonia)
Toilet Corrosion Test Chamber (HCl and Ammonia) Product Description: Toilet seat hydrochloric acid and ammonia corrosion tester is used for testing to evaluate the ability of toilet seat product...
Negative pressure tester for medical syringes
Negative pressure tester for medical syringes Negative pressure tester for medical syringes - Other test instrument - standard Product Information: Instrument characteristics   It is compo...
Cupping Tester
Cupping Tester Meet the standard: ISO 1520 ASTM E643 EN ISO 1520 DIN 50101 DIN 50102 Product Introduction: The cupping test provides valuable information...
Pipes Hydrostatic Testing Machine
Pipes Hydrostatic Testing Machine Standard ISO 1167: For thermoplastics pipe systems under constant internal pressure. ASTM D 1598: Standard test method for time-to-failure of pla...
Safety Helmets Acceleration Impact & Penetration Tester/  Helmet acceleration impact tester  /   helmet impact penetration tester
Safety Helmets Acceleration Impact & Penetration Tester/ Helmet acceleration impact tester / helmet impact penetration tester Standard GB/T 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-1 (Industrial Safety Helmets – Impact Absorp...
All supplier products

Same products

pH-2398  pH/EC/ORP/Temperature  multi-parameter Water Quality Tester
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester Seller: Kelilong Electron Co.,Ltd Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent...
ORP-2026S  Waterproof Soil ORP and Temperature Meter
ORP-2026S Waterproof Soil ORP and Temperature Meter Seller: Kelilong Electron Co.,Ltd 范围 ORP -999~999mV Temp 0~50℃ 分辨率 ORP 1mV...
TDS-2616  Waterproof EC/TDS/Temperature Meter
TDS-2616 Waterproof EC/TDS/Temperature Meter Seller: Kelilong Electron Co.,Ltd Range EC ~19.9mS TDS Temp 0~50℃ R...
EC-98330 CF ECOstick - Nutrient Tester
EC-98330 CF ECOstick - Nutrient Tester Seller: Kelilong Electron Co.,Ltd Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el...
PH-808 Waterproof Soil PH Meter
PH-808 Waterproof Soil PH Meter Seller: Kelilong Electron Co.,Ltd Model PH-808 Range PH ~14.00PH Temp 0~50℃ ...