Vapor Shrinkage Tester-QINSUN

• 

I. Product Overview

TheVapor Shrinkage Testeris a specialized thermal analysis instrument designed to measure dimensional changes in textiles, polymers, or composites when exposed to steam or saturated vapor environments. It simulates industrial finishing processes (e.g., sanforization) to evaluate shrinkage resistance and dimensional stability of materials.

• Type: Environmental test chamber with steam generation
• Test Temperature: Ambient +20°C to 100°C
• Steam Pressure: 0.1-0.3 MPa (adjustable)
• Chamber Size: 500×500×600mm (W×D×H)
• Applications: Textile finishing, geotextiles, medical fabrics

II. Technical Specifications

III. Key Features

• Dual Test Modes:
  • Static Vapor Mode:Continuous steam exposure
  • Dynamic Steam Mode:Cyclic steam/air alternation
• Advanced Measurement:
  • 3D surface mapping (16,000 measurement points)
  • Real-time shrinkage rate calculation
  • Automated sample alignment system
• Safety Features:
  • Pressure relief valve (auto-shutdown at 0.35MPa)
  • Anti-scald door interlock
  • Overheat protection (triggers emergency cooling)

IV. Compliance Standards

• ISO 6330 (Textile testing - Textile fabrics)
• ASTM D3759 (Shrink resistance of fabrics)
• AATCC 133 (Dimensional changes in fabrics)
• GB/T 8629 (Chinese textile shrinkage standard)

V. Applications

1. Textile Manufacturing:Pre-shrinkage treatment validation
2. Quality Control:Batch testing of finished fabrics
3. R&D:Developing shrink-resistant coatings
4. Forensic Analysis:Evaluating garment shrinkage causes

Standard Test Procedure:

1. Sample Preparation: Cut 50×50mm specimens
2. Loading: Secure in steam-permeable clamps
3. Parameter Setup: Select steam pressure/temperature
4. Exposure: Run test cycle (typically 30-60min)
5. Analysis: Compare pre/post-test dimensions via software

Safety Precautions:

• Use heat-resistant gloves when handling samples
• Maintain 1m clearance from steam vents
• Decontaminate chamber after testing chemicals

Other supplier products

	PLC liquid crystal touch impact testing machine (simple suspension)	Product Introduction: Liquid crystal touch impact testing machine is mainly used for hard plastics (including sheet, pipe, plastic profile)， reinf...
	Textile Drying Time Tester
	Thermal Insulation Materials Adhesive Strength Tester	Meet the standard: JGJ144-2004 "External Wall insulation engineering Technical Regulations" JG158-2004 "Rubber powder polystyrene particles exter...
	Shoe Peeling Strength Tester	Product Introduction: Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the p...
	Automotive Seat Belt Buckle Bending Test Machine-QINSUN	Standard ISO 10195(Seat Belt Anchorage Hardware - Test Methods) ECE R16(Uniform Provisions Concerning the Approval of Safety Belts and Restrain...

Same products

	Full-Body Garment Stress Tester,FZ/T 70015	Seller: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Seller: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Seller: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Seller: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Seller: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...