Photovoltaic module outdoor exposure test system

Whats/App: +86 156 1874 6768

Web: standard-groups.com

The Photovoltaic Module Outdoor Exposure Test System is designed to simulate real-world environmental conditions for accelerated aging and performance evaluation of PV modules. It combines precise temperature, humidity, and solar irradiance control with advanced data acquisition and AI-based diagnostics, enabling rapid assessment of long-term durability, degradation modes, and energy harvesting efficiency.

Application

(1) Accelerated aging and performance testing of photovoltaic (PV) modules

(2) Qualification and type approval for PV modules under IEC 61215 and IEC 61730 standards

(3) Outdoor exposure simulation for desert, tropical, polar, and marine conditions

(4) R&D of solar module materials and encapsulation technologies

(5) Assessment of PID (Potential Induced Degradation), delamination, and hotspot formation

Standards

(1) IEC 61215 – Terrestrial Photovoltaic (PV) Modules: Design Qualification and Type Approval

(2) IEC 61730 – Photovoltaic (PV) Module Safety Qualification

(3) UL 61730 – Safety Standard for Photovoltaic Modules

(4) ISO 9060 – Solar Energy: Classification of Pyranometers

(5) CE Certification – Conformité Européenne

(6) Optional: IEC 60904 series for solar simulator calibration

(7) Optional: UL 1699B – Arc-Fault Detection

Features

Real-World Accelerated Aging: Achieves 10–15 year equivalence within 6 months using IEC-compliant damp heat and UV exposure.

Spectral Matching: AM1.5G filtered solar simulation ensures standardized irradiance.

Multi-Environment Testing: -40°C to +85°C chamber range with ±1°C stability and 95% RH for tropical/marine simulation.

Energy Harvesting Capability: Grid-tied system with MPPT tracking offsets up to 70% of power consumption.

Smart Data Acquisition: 16-channel logging of I-V curves, EL imaging, and thermal mapping.

AI-Powered Diagnostics: Machine learning predicts module degradation, including delamination and hotspots.

Safety Features: UL 1699B-compliant arc-fault detection and dual redundant emergency shutoff circuits.

Product Flexibility: Dual-axis tracker (±60° tilt, ±180° azimuth) for precise solar alignment, modular design expandable from 5 kW to 50 kW.

Parameters

Parameter	Specification
Solar Irradiance	300–1,200 W/m² (AM1.5G filtered)
Temperature Range	-40°C to +85°C (operational)
Temperature Deviation	≤ ±1°C (steady state)
Humidity Range	10%–95% RH (non-condensing)
Chamber Volume	2 m × 3 m × 2.5 m (expandable)
Power Supply	380V/415V, 3-phase, 50/60Hz
Dimensions (W×D×H)	2,500 mm × 3,500 mm × 3,000 mm
Weight	1,200 kg (net) / 1,800 kg (gross)

Accessories

(1) IEC 60904-4 compliant reference cells (4 pcs)

(2) Type T thermocouples with ceramic insulation (10 pcs)

(3) Software Suite: SolarTest Pro license (Windows/Linux), 1-year cloud-based PV simulation access

(4) Calibration & Safety: NIST-traceable irradiance meter, arc-flash protective gear (Class 2, 3 pairs)

(5) Maintenance Kit: Spare fuses, surge protectors, chamber cleaning solution (non-corrosive)

(6) Documentation: Multilingual quick-start guide (printed + digital), compliance certificates for IEC/UL/ISO standards

Test Procedures

Install PV modules on the dual-axis tracker and connect reference cells and thermocouples.

Configure test parameters via the 10” sunlight-readable HMI or select preloaded IEC/UL test sequences.

Set solar irradiance, temperature, humidity, and cycle duration as required.

Initiate the test sequence; the system automatically performs environmental cycling and data acquisition.

Monitor real-time measurements of I-V curves, thermal mapping, and EL imaging through HMI or remote access.

Upon completion, return chamber to ambient conditions before sample removal.

Export data reports via the software interface for analysis and documentation.

Maintenance Information

Clean solar simulator lamps, chamber surfaces, and tracker mechanisms regularly to ensure accurate irradiation.

Replace thermocouples, reference cells, and fuses as recommended by the manufacturer.

Perform annual calibration of irradiance meters and data acquisition channels.

Verify arc-fault detection circuits and emergency shutoff functionality before each test cycle.

Maintain chamber and tracker in a dry, ventilated environment when not in operation.

Other supplier products

	Carpet hair removal measurement device	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D5417(Standard Test Method for Quantifying Loss of Fiber from Carpets) IS...
	Contact Lens Spectral Transmittance Analyzer	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: Contact lens spectral transmittance measuring instrument is a kind o...
	Intervertebral Fusion Cages Torsion Fatigue Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Intervertebral Fusion Cages Torsion Fatigue Tester is a specialized biomechanical testi...
	Battery Isothermal Calorimeter	Whats/App: +86 156 1874 6768 Web: standard-groups.com Battery Isothermal Calorimeter is a professional instrument developed based on the principl...
	Surface performance testing machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Measurement of friction force and friction coefficient of metals, ceramics, po...

All supplier products

Same products

	Large Naïve VHH Library	Seller: AlpVHHs	Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o...
	pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester	Seller: Kelilong Electron Co.,Ltd	Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent...
	ORP-2026S Waterproof Soil ORP and Temperature Meter	Seller: Kelilong Electron Co.,Ltd	范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV...
	TDS-2616 Waterproof EC/TDS/Temperature Meter	Seller: Kelilong Electron Co.,Ltd	Range EC ～19.9mS TDS Temp 0～50℃ R...
	EC-98330 CF ECOstick - Nutrient Tester	Seller: Kelilong Electron Co.,Ltd	Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el...