Helmets Designated Protection Areas Tester

The helmet designated protection area testing device is a piece of equipment used to mark test points and lines on helmets, and is suitable for all testing standards. It can define the upper, lower, left, and right fields of vision of the helmet, ensuring the helmet's effectiveness under different testing standards.

Application

1. Used to mark test points and test lines on helmets.

2. Used for line - marking according to different test standards.

3. Used to define the upper and lower fields of view as well as the left and right fields of view of helmets during research and development.

Standards:

GB 811-2010:Helmets for motorcyclists

Feature:

Infrared emitter;

Aluminum bracket (adjustable);

Angle of infrared bracket can be adjusted;

Aluminum alloy is used in the machine and all the accessories;

Main machine performance characteristics:

Adjustable handles on the arm can be easily adjusted to apply to different testing standards.

The fixed point tracking indicator adopts infrared control, which can be moved on the machine to find the base plane and reference plane easily.

The head support is made of steel with galvanized surface treatment, and there is a limiting device every 45°, which can easily rotate the head in any direction to adapt to different test points and test standards.

Parameters

Technical Parameter	Description
Infrared emitter usage	Adopts infrared emitters
Support structure	Uses adjustable aluminum alloy brackets
Adjustable angle of infrared bracket	The angle of the infrared bracket can be adjusted
Material of machine and accessories	The machine and all accessories are made of aluminum alloy
Applicability	Applicable to all standards

Accessoriess

The following are the names of the accessories for the helmet-designated protection area tester (using a helmet point and protection zone testing device as an example):

Infrared transmitter

Aluminum alloy bracket (adjustable type)

Working arm (with adjustable handle)

Tracking indicator light (infrared controlled)

Head-shaped support (steel with galvanized surface treatment, with limiting device)

Test Procedures

Helmet Installation: Mount the helmet onto the support frame of the testing equipment.

Applying Force: Apply a specific force using a force gauge for the impact test.

Data Recording: According to national standards, record the helmet's impact resistance, including cushioning performance and impact durability.

Testing Field of View and Protection Area: Use a field of view testing component and a laser emitter to test the helmet's field of view angle and protection area.

Data Analysis: Based on the test results, analyze whether the helmet's protective performance meets the requirements specified in the standards.

Other supplier products

	Bone Screw Pull-out Tester	Standard YY/T 1504. ASTM F543: standard specifies a test method for measuring the axial force required to extract or fail a metallic bone screw f...
	Carpet Abrasion Resistance Tester	Standard ASTM D4157(Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)) ISO 12947-2(Textiles - Deter...
	Carpet Flammability Test device	Standard BS 4790: Hot Metal Nut Method for Floor Covering Fabrics ISO 6925: Ambient Temperature Tablet Test for Floor Coverings BS 6307: Fire Te...
	Needle Flame Test Machine, IEC60695-2-2，ANSI needle flame test	Introduction： TESTECH Needle Flame Tester is in accordance with national standards IEC60695-2-2 and IEC60695-11-5to design andproduce.Thetester ap...
	Enamel Boiling Water Resistance Tester	The Enamel Boiling Water Resistance Tester is designed to evaluate the chemical attack resistance of enamel coatings under boiling water conditions...

All supplier products

Same products

	Full-Body Garment Stress Tester,FZ/T 70015	Seller: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Seller: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Seller: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Seller: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Seller: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...