Total Hip Joint Prostheses Wear Tester

Standard

YY/T 0651.1-2016 (China): Specifies wear testing parameters for total hip prostheses, including angular motion, loading modes, and environmental conditions.

ISO 14242-1:2014 (International): Defines protocols for simulating physiological loading and kinematics during hip joint wear testing.

ASTM F3047M-15: Additional compliance for advanced testing scenarios including edge loading and micro-separation.

Product Advantages

Triaxial Motion Simulation: Replicates full physiological motion profiles (flexion/extension ±100°, abduction/adduction ±30°, internal/external rotation ±40°).

Dynamic Load Control: Dual-peak loading up to 4.500 N with 0.1% force accuracy.

Biorelevant Environment: Temperature-controlled (37±2°C) lubrication bath with 30±2 g/L protein concentration.

Extended Durability: Capable of 5+ million cycle testing with <0.5% drift in calibration.

Automated Compliance: Pre-programmed ISO/YYT test protocols with real-time data validation.

Modular Design: Six-station configuration allows parallel testing of multiple specimens.

Product Features

Electrohydraulic Actuation: Six independent servo-hydraulic actuators for precise motion control.

3D Force/Torque Sensors: Multi-axis sensors measure axial forces and torsional moments simultaneously.

Temperature-Controlled Bath: Recirculating lubrication system with protein concentration monitoring.

High-Resolution Imaging: Optional integration with micro-CT systems for in-situ wear analysis.

AI-Powered Analytics: Machine learning algorithms predict wear rates from initial test cycles.

Safety System: Emergency stop, over-pressure relief, and laser-based specimen breakage detection.

Technical Parameters

Parameter	Specification
Angular Motion Range	Flexion/Extension: ±100° Abduction/Adduction: ±30° Rotation: ±40°
Max. Axial Force	±4.500 N (1.000 N resolution)
Load Control Accuracy	±0.5% of reading (0–4.500 N)
Frequency Range	0.1–5 Hz (programmable waveforms)
Temperature Control	37±2°C (PT1000 sensors)
Lubrication System	15L capacity with protein skimmer and bubble trap
Data Acquisition	100 kHz sampling rate (16-bit resolution)
Power Requirements	220V/110V ±10%, 50/60Hz, 2.500W
Dimensions (W×D×H)	1.800 × 1.200 × 2.000 mm
Weight	950 kg (including bath and control cabinet)
Noise Level	<65 dB (A-weighted)

Standard Accessories

Hip Simulator Fixture Kit:

Self-centering femoral head adapters (16–32 mm)

Acetabular cup positioning jigs (60° inclination standard)

Biorelevant Bath System:

15L capacity with recirculation pump and protein skimmer

316L stainless steel construction with HEPA filtration

WearMaster Pro Software:

Automated wear rate calculation (mass loss/volume displacement)

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via iOS/Android app

Operator Kit:

Calibrated torque wrench set (1–50 Nm)

Specimen alignment gauges (ISO 14242-1 compliant)

Calibration Bundle:

NIST-traceable force calibration weights

Angular encoder verification tool

Safety Kit:

Laser safety curtains

Acoustic enclosure with 30 dB noise reduction

Other supplier products

	Industrial Oven for Batteries	Features and Benefits 1.Real-time temperature monitoring, temperature range can be customized to +1000 ° C, +1200 ° C, accuracy ±0....
	Office Chair Caster Durability Tester	The Office Chair Caster Durability Tester is designed to evaluate the rolling durability, structural reliability, and service life of office chair ...
	Intramedullary Nails/Bone Screw Static Torque Testing Machine	Standard YY/T 0591-2011: Chinese standard specifying torsion testing methods for intramedullary nails, including torque application, angular displ...
	Socks wear tester	Product Introduction: Socks wear tester is a special equipment, mainly used to test the wear resistance of socks material. It evaluates the comfor...
	UV Curing Machine	Description UV is the ultraviolet (Ultra-VioletRay) English abbreviation. Industrial UV wavelength to 200nm to 450nm for its scope of application....

All supplier products

Same products

	Full-Body Garment Stress Tester,FZ/T 70015	Seller: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Seller: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Seller: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Seller: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Seller: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...