Photovoltaic module outdoor exposure test system
Standard
- IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
- IEC 61730: Photovoltaic (PV) Module Safety Qualification
- UL 61730: Safety Standard for Photovoltaic Modules
- ISO 9060: Solar Energy – Classification of Pyranometers
- CE Certification(Conformité Européenne)
Product Advantages
- Real-World Accelerated Aging
- 10–15 Year Equivalence: Achieves IEC 61215 damp heat/UV exposure in 6 months.
- Spectral Matching: AM1.5G filter for standardized terrestrial solar simulation.
- Multi-Environment Testing
- -40°C to +85°C Chamber: Replicates desert heat to polar cold with ±1°C stability.
- 95% RH Humidity Control: Tests PID resistance in tropical/marine environments.
- Energy Harvesting
- Grid-Tied Design: Offsets 70% of power consumption via test module output.
- MPPT Tracking: Optimizes energy extraction during standby periods.
- Smart Data Acquisition
- 16-Channel Logging: I-V curves, EL imaging, and thermal mapping in real-time.
- AI-Powered Diagnostics: Predicts degradation modes (delamination, hotspots) via ML.
- Safety First
- Arc-Fault Detection: UL 1699B-compliant for DC side protection.
- Emergency Shutoff: Dual redundant safety circuits with GPS-enabled alerts.
Product Features
- Dual-Axis Tracker: ±60° tilt, ±180° azimuth for precise solar alignment.
- 10” Sunlight-Readable HMI: Preloaded IEC/UL test sequences with customizable dwell times.
- Remote Monitoring: 4G/LTE connectivity with SMS/ alerts.
- Self-Cleaning System: Automated rain simulation for dust accumulation studies.
- Modular Design: Expandable from 5 kW to 50 kW for pilot-scale testing.
Technical Parameters
| Parameter | Specification |
|---|---|
| Solar Irradiance | 300–1,200 W/m² (AM1.5G filtered) |
| Temperature Range | -40°C to +85°C (operational) |
| Temperature Deviation | ≤±1°C (at steady state) |
| Humidity Range | 10%–95% RH (non-condensing) |
| Chamber Volume | 2m × 3m × 2.5m (W×D×H, expandable) |
| Power Supply | 380V/415V 3-phase, 50/60Hz |
| Dimensions | 2,500mm (W) × 3,500mm (D) × 3,000mm (H) |
| Weight | 1,200 kg (net) / 1,800 kg (gross) |
Accessories Included
- Testing Kit:
- 4x IEC 60904-4 compliant reference cells.
- 10x Type T thermocouples with ceramic insulation.
- Software Suite:
- License key forSolarTest Pro(Windows/Linux).
- 1-year free access to cloud-based PV simulation tools.
- Calibration & Safety:
- NIST-traceable irradiance meter.
- Arc-flash protective gear (Class 2, 3 pairs).
- Maintenance Kit:
- Spare fuses and surge protectors.
- Chamber cleaning solution (non-corrosive).
- Documentation:
- Multilingual quick-start guide (printed + digital).
- Compliance certificates for IEC/UL/ISO standards
Send product request
Other supplier products
 |
Песк - падающая машина для испытания шлемов мотоцикла | Основные целиВ основном используется для проверки абразионно-устойчивости линз очков шлема и оценки их способности сопротивляться повреждениям, в... |
 |
Safety Helmets Impact and Penetration Resistance Tester | Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact... |
 |
Electrolyte wettability test device | Standard ASTM D724-98: Standard Test Method for Surface Wettability of Paper (Angle-of-Repose Method Adapted) ISO 8296: Plastics – Determ... |
 |
Safety Helmet Impact Acceleration Tester | Purpose This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance p... |
 |
Fire retardant coatings tester tunnel method | Product Introduction: The fire retardant coating flame propagation tester is suitable for testing the flame propagation characteristics of the fir... |
Same products
 |
Gas Oxidizing Property Tester | Seller: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | Seller: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | Seller: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | Seller: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
