UL1581 FCable Burning Test Chamber

• 

Introduction:

Wire and cable horizontal vertical combustion tester is designed and manufactured according to UL1581. The tester is used to carry out 1060 vertical combustion and FT1 test , 1061 cable burning test, 1080VW-1 (vertical sample) combustion test, 1090 horizontal sample electric wire burning test and 1100 horizontal sample / FT2 combustion for the finished wire cable or cord, to assess the ability of a burning wire cable or cord to propagate a flame to a nearby flammable materials.

Application

The combustion tester can be used in horizontal vertical combustion of finished wire cables or cords to assess the tendency of a burning cable or cord to spread fire to the nearby flammable materials.

Standards

UL1581 sect 1060~1100Reference standards for safety for electrical wires, cables, flexible cords.

ASTM D 5025Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials.

ASTM D 5027

Features

1.Structure:

·Chamber is powder coated by electrolytic plate electrostatic spraying, beautiful appearance, anti-rust and anti-corrosion. The internal chamber is electrostaticsprayed with black powder.

·A strong exhaust ventilation device is set on the top of the chamber. When the test is completed, the ventilation device is opened together with the air supply system to emit exhaust to the outside; During the test process, this system shall be in a closed state.

·A tempered glass observation window sealed during the test process is set in the front of the chamber for the convenience to observe the test situation.

·Below the glass observation window, there is an operating hole, which is fitted with a sealed glove, and the operator wears the sealed glove to operate the burner.

2.Temperature measurement system:

·Thermal sensors (copper conduits and thermocouples) - The conduit structure should be copper cathodes with extremely high conductivity .at the length of 19.14 ± 0.02mm.

·Digital thermometer matches with the imported K-type thermocouple. Readings is higher than 1000 ° C.

·The whole test system is movable. Place the sample in the test chamber for the temperature measurement.

3.Test apparatus and test fixture:

·Main fixture: test holder and combustion burner.

·Flame height is easy to adjust. The total height of the gas flame is 125 ± 10mm, the blue inner flame height is 40 ± 2mm; the flame test angle is adjustable from 0 ~ 45.

·Special gas flowmeter plus imported needle valve precisely controls the gas flow.

·Brand pressure gauge and control valve; working gas pressure 69 ~ 138 Kpa.

·Air flow digital display.

·Test stand: made of stainless steel, independently horizontal holder and vertical holder, namely the three specifications of FT1. FT2. VW-1. The position of vertical holder and burner is parallel to the observation window, easy to observe and operate.

·High-voltage electronic automatic ignition system, and security protection system automatically cutting off the gas source.

·Wedged holder: increase wedge. The burner shall be installed on the wedge as per safety requirements , can be easily moved, and also can be accurately moved back to the specified location.

Other supplier products

	Self - tapping Tester	Standard ISO 6475: Implants for surgery – Wear of total hip-joint prostheses ASTM F543: Standard Specification and Test Methods for Metalli...
	Spinal Pedicle Screw-Rod System Compressive Fatigue Testing Machine	Standard YY/T 0857-2011 (China): Specifies compression fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, freq...
	Full Notch Creep Tester	This testing machine is used to test the environmental stress cracking performance of plastic materials. The equipment features touchscreen operati...
	Photo fill light box	Standard CE & FCC Certified: Meets electromagnetic compatibility and safety standards for EU/US markets. RoHS Compliant: Lead-free constructi...
	Residual Ethylene Oxide Gas Chromatograph	The ethylene oxide residual gas chromatograph is a professional analytical instrument for detecting the residual amount of ethylene oxide in medica...

Same products

	Full-Body Garment Stress Tester,FZ/T 70015	Seller: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Seller: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Seller: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Seller: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Seller: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...