Heat Storage Performance Tester

• 

Heat Storage Performance Tester provides standardized procedures and controls radiation heat conditions, providing repetitive measurement for heat storage and thermal transfer of protective fabric materials. Through measurement, the characteristics and rating of the material can be quickly identified, and the possibility of burn to the material is predicted through the integrated burn model of the instrument.

Operation Principle

The equipment is used to detect heat storage and thermal transfer characteristics of protective clothing, safety shoes, gloves, helmet and other materials, and determine the possibility that protective equipment can cause skin burns when exposed to heat.

Standards

ASTM F2731 Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems

Product Details

Instrument Structure:

The equipment includes radiant heat source, sample holder, calorimeter induction component, pneumatic start transfer tray with water-cooled slide frame, compressor, DAQ/control system and combustion injury analysis program.

Instrument Features:

·Assessing the possibility of skin burns which is related to the heat energy storage performance of fabric.

·Automatic or manual test operation

·Radiant plate heat source (adjustable temperature) generates radiation energy, which matches with the spectral line density of building fire.

·The water-cooled sample sliders, electronic driven, realizes the precise control of the time of exposure on the heat source.

·The pneumatic compressor uses a low conductivity core bar to apply a 1PSI load on the sample.

·The system includes the integrated burn model, which predicts the severity of skin injuries, and calculates the estimated time of exposure leading to secondary burns.

·The combustion results are real-time values and the graph shows the skin layer interface temperature and combustion synthesis of Omega.

System Including:

·Dell PC laptop.

·ThermDAC software with a combustion model

·Signal conditioning circuit and USB interface

·Power supply and control cable, operator manual

·One-year warranty.

Laboratory Requirement:

·The laboratory should be well ventilated with dry compressed air source and cooling water supply pipe.

·The desktop device is designed for operation of horizontal or vertical radiant heat sources.

·It is recommended to operate in a vertical direction.

Other supplier products

	Metal ring friction and wear testing device	Evaluate the wear resistance of the material: By simulating the friction process, real-time monitoring of friction, temperature, wear and other pa...
	Enamel Boiling Water Resistance Tester	The Enamel Boiling Water Resistance Tester is designed to evaluate the chemical attack resistance of enamel coatings under boiling water conditions...
	Intramedullary Nails/Bone Screw Static Torque Testing Machine	Standard YY/T 0591-2011: Chinese standard specifying torsion testing methods for intramedullary nails, including torque application, angular displ...
	Surgical Blade Sharpness Tester	The Surgical Blade Sharpness Tester is a multi-functional testing device featuring a 7-inch LCD touchscreen display, suitable for testing the sharp...
	Cleanliness automatic extractor	Component Cleanliness Cabinet equipped with cleaning modes such as pressure jet cleaning, perfusion cleaning, spray cleaning, etc., the cleaning ag...

Same products

	Test for Flammability of Materials ,AS1530.2,Fire reaction test apparatus	Seller: Standard International Group (HK) Limited	Introduction Thistester is developed base on thestandard AS1530.2. test for flammability of mate...
	Building Material Radiant Panel Test Machine,AS/NZS 1530.3	Seller: Standard International Group (HK) Limited	Products This machine is designed according to AS/NZS 1530.3; Thedeviceviaagasradiantplatetohea...
	Radiant Panel Flame Spread Apparatus，fire spread test machine	Seller: Standard International Group (HK) Limited	Description ASTM E162 is one most widely used test standard to evaluate the propagation properti...
	Single-Flame Source Tester， ISO11925-2，DIN 53438; DIN4102-1	Seller: Standard International Group (HK) Limited	Introduction This instrument is designed according to ISO11925-2. it is used to test building ma...
	Density of Smoke from the Burning or Decomposition of Plastics，ASTM D2843 Smoke Density Test	Seller: Standard International Group (HK) Limited	Introduction In a fire, people are often smoke suffocated or unable to escape because of the inv...