ASTM D1238 melt flow indexer
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Introduction
Melt flow indexer(MFI) are used for military uniforms, canvas, canvas, labor insurance products. The fabric fusing tester is designed for use in the determination of the heat-resistant properties of chemical fiber and blended fabrics to determine the effect of fabric resistance to melt treatment.This instrument is widely used in plastics raw material production plant, plastic products factory, petrochemical company and other industries as well as related colleges and universities, research institutes and quality inspection units.
Melt Flow Indexer conforms with GB/T9643. GB/T3682. JB/T5456. ISO1133 standards, and is designed in accordance with the GB/T3682-2000 and ASTM D1238-98 as well as JB/T5456. ISO1133 and similar standards for reference, used for determination of thermoplastics melt volume flow rate (MFR). The melt mass flow rate applies automatic sampling weighed by the balance; Then the volume flow rate is calculated according to the formula. The final result of the measurement is shown on the LCD screen of the instrument and output by the microtype printer.
Standards
ISO 1133.ASTM D1238.ASTM D4060.GB/T3682
Application Scope
Accuratemeasuring data, simple operation, intuitive and clear, stable and reliable performance. It is suitable for fluorine plastic, nylon and other engineering plastics,and it can also be applied to polyethylene (PE), polypropylene (PP), polyformaldehyde (POM), polystyrene (PS)ABS resin,polycarbonate plasticwith lower melting temperature. It is widely used in plastic production, plastic products, petrochemical industry and related colleges and universities, scientific research units and commodity inspection organisation.
Features
1. The heating rate is fast and the overshoot is very small
2. High temperature accuracy
3. After packing, the thermostat can be restored quickly
4. Calibration of test parameters and correction of convenience
5. Manual and automatic cutting test method can be adopted
6. Liquid crystal display in Chinese
7. Equipped with printer, automatic printout of test results
Work Principle
The melt flow indexer is a plastic extruder. Under the specified temperature condition, the heat furnace is used to melt the measured objects. The measured objects in molten state is squeezed out through a certain diameter hole under the specified load. In plastic production, the melting index is used to indicate the physical properties of polymer materialssuch as fluidity and viscosityin the melt state. The so-called melt mass flow rate is the 10 minutes extrusion weight converted from the average weight of the extruded samples from different parts.
Technical Parameters
| Items | Parameters |
| Temperature range and accuracy | 0 ℃ ~ 600 ℃, continuously adjustable, accuracy ± 1 ℃ |
| Time accuracy | 0.1s |
| Rush time | 0 ~ 60s can be arbitrarily set |
| Steel ball specifications | ¢ 8mm, weight 21g |
| Power supply | AC220V 50Hz 500W |
| Dimensions | 440mm × 275mm × 350mm (length × width × height) |
| Weight | About 45Kg |
Standard test load (level 8) :
Level 1:0.325 kg= (piston rod + weight tray + heat shield +No.1 weight) =3.187N
Level 2:1.200 kg=(0.325+ 0.875 No.2weight) =11.77 N
Level 3:2.160 kg=(0.325+ 1.835 No.3weight) =21.18 N
Level 4:3.800 kg=(0.325+ 3.475 No.4 weight) =37.26 N
Level 5:5.000 kg=(0.325+ 4.675 No.5 weight) =49.03 N
Level 6:10.000 kg=(0.325+4.675 No.5 weight + 5.000 No.6 weight) =98.07 N
Level 7:12.500 kg=(0.325+ 4.675 No.5 weight + 5.000 No.6 weight+ 2.500 No.7 weight) =122.58 N
Level 8:21.600 kg= (0.325x 0.875 No.2weight + 1.835 No.3weight+ 3.475 No.4weight+4.675 No.5weight+5.000 No.6weight+2.500 No.7 weight+ 2.915 No.8 weight) =211.82 N
The relative deviation of test load is less than 0.5%.
Send product request
Other supplier products
 |
Benchtop gravel impact tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard Test ASTM D3170: Coating resistance to gravel impingement. ISO 20567: Paints and... |
 |
Laboratory Explosion Limit Testing Equipment OEM Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards EN 13938-2:Respiratory Protective Equipment for Firefighters - Par... |
 |
Light transmittance fog meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable standards: GBT 2410-2008: Determination of light transmittance and fog degree o... |
 |
Seatbelt Test Dummy ECE R16 | Whats/App: +86 156 1874 6768 Web: standard-groups.com The ECE R16 crash test dummy is a professional anthropomorphic test device representing a 5... |
 |
Automatic guide pin anchoring force apparatus | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This instrument is suitable for a variety of medical and surgical applications... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheFull-Body Garment Stress Testeris a pr... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheIndustrial Dry Cleaning and Energy-Sav... |
 |
MST Medical Compression Stocking Tester,compression sock tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The MST Medical Compression Stocking Test... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Textile Manufacturing:Testi... |
 |
Dental material color stability tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The applications of color st... |
