Nail Bed Flammable Tester，CFR 1633 mattress fire tester
Standards
16CFR1510.ASTMF9634.6.2
Applications
The tester is designed for determining the flammability of cloth toys and plush toys, used in the detection of flammability of flammable hair, and recording the burning time, to make a assessment whether the flammability of the burning part meet the requirement of standards.
Product Information
The tester is used as test fixture in the flammability test of solid and soft toys. Place the prepared sample in a draft-free area that can be ventilated and cleared after each test. A specified ignition source is acted on the sample until ignition occurs. Observe the combustion state of sample and assess its flammability.
Test Method
1.Place the prepared sample on the tester, and Measure the dimensions of the sample.
2.Hold a burning paraffin candle whose flame is a minimum of 16mm high, with the tip of the inner cone of the flame in contact with the surface of the sample for 5s, remove the candle. Maintain the burning for another 5s or burn to the end of the major axis.
3.Measure the length of the burned area, and calculate the rate of burning along the major axis of the sample.
Technical Parameters
| Items | Parameters | |
| SocketWrenchScrew1 | Material | StainlessSteel |
| Dimension | #10-32×0.38inches(LG) | |
| Quantity | 9 | |
| Apartfromtheedge | 0.31inches(7.8mm) | |
| Screwspacing | 1.25inches(31.75mm) | |
| Nail2 | Material | StainlessSteel |
| Dimension | #8d×2.50inches(LG) | |
| Quantity | 64 | |
| Apartfromtheedge | 0.62inches(15.7mm) | |
| Screwspacing | 4.69inches(119mm) | |
| Upplate-stainlesssteelplate3 | 0.12×10.12×10.12inches(3×257×257mm)(LG) | |
| Bottomplate-stainlesssteelplate4 | 0.25×10.00×10.06inches(6.35×254×255.5mm)(LG) | |
| Outsidedimension | Approx.254×254mm(1×1inches) | |
Send product request
Other supplier products
 |
Building material burning tester | Technical specifications TheBuilding material burning testeris designed and manufactured according to the standard gb8626-88 and is used to determ... |
 |
Automatic freezing point pour point cold tester | Product Introduction: The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f... |
 |
Vertical Flammability Chamber | VTEC Vertical Flammability Chamber： Testing Standards: ASTM D6413-99. DOC-FF 3/71. CALIF TB-117. GB/T 5455. CPAI-84 Applications: Vertical Flamm... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to easily measure and quantify softness, elasticity, ... |
 |
Small Parts Tester | Test Procedure: Usage Methods and Interpretations Applicable standards: ASTM F963 EN 71-1 16 CFR Part 1501 ISO 8124-1 Product Advantages: Eff... |
Same products
 |
Test for Flammability of Materials ,AS1530.2,Fire reaction test apparatus | Seller: Standard International Group (HK) Limited | Introduction Thistester is developed base on thestandard AS1530.2. test for flammability of mate... |
 |
Building Material Radiant Panel Test Machine,AS/NZS 1530.3 | Seller: Standard International Group (HK) Limited | Products This machine is designed according to AS/NZS 1530.3; Thedeviceviaagasradiantplatetohea... |
 |
Radiant Panel Flame Spread Apparatus，fire spread test machine | Seller: Standard International Group (HK) Limited | Description ASTM E162 is one most widely used test standard to evaluate the propagation properti... |
 |
Single-Flame Source Tester， ISO11925-2，DIN 53438; DIN4102-1 | Seller: Standard International Group (HK) Limited | Introduction This instrument is designed according to ISO11925-2. it is used to test building ma... |
 |
Density of Smoke from the Burning or Decomposition of Plastics，ASTM D2843 Smoke Density Test | Seller: Standard International Group (HK) Limited | Introduction In a fire, people are often smoke suffocated or unable to escape because of the inv... |
