Collection of needle rubber sleeve resilience tester
Guide pin anchoring force tester - Other test instrument - standard
Standards:
YYT1618-2018 "Disposable Human Venous Blood Sample Collection Needle"
Applications:
Product Information:
Product introduction
The collection needle rubber sleeve resilience tester evaluates the force measured by the
collection tube when it passes vertically through a die hole larger than 0.05 mm outside
diameter of the collection needle tube under test.
Technical parameter
1. Pressure test range: 0 — 50N, error is not more than ±1%, resolution 0.01N.
2. Test time: 1-999S, any choice, the error is not more than ±0.5S.
3. Test speed: 50mm/min, 80mm/min, 100mm/min error is not more than ±2%.
4. Printing method: Each time can print 8, 10 test data or 13 test data and the average
piercing force and deviation value.
5. Measuring distance: 0 — 50mm, error is not more than ±0.1mm.
Operation method
1. Insert the needle at the butt end into the die hole of the clamping fixture 2mm above
the surface.
2. Start the test device to compress the rubber sleeve.
3. Measure the rubber sleeve resilience at 5mm and 15mm between the needle tube and
the needle base.
4. The test result is 0.5N≤ the rubber sleeve resilience ≤1.5N.
Send product request
Other supplier products
 |
Tube Dropping Impact Tester | Tube Dropping Impact Tester - Material and Parts of Automotive - standard Standards: GB / T14152-2001 "Thermoplastics pipes-Determination of re... |
 |
Sharp Tip Tester | Meet the standard: ASTM F963 EN 71-1 ISO 8124-1 Product Introduction: Certain points on toys, if excessively sharp, can cause injuries. Safe... |
 |
Powder Wet Vibrating Screen System For Lithium Battery Material Testing | Standard ASTM E11: Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves ISO 3310-1: Test Sieves – Technical Requirement... |
 |
Automatic Button Attach Machine | Usage: Suitable for children's wear, raincoat, stationery bags. Mechanical Parameters Drive mode：Servo motor Motor Power：220V/0.75 Kw Working ... |
 |
Medical injection needle tip puncture force tester | Medical injection needle tip puncture force tester - Other test instrument - standard Standards: GB15811-2016 "Disposable Sterile Injection Nee... |
Same products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Seller: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
