Paper dust meter
Paper dust meter - Other test instrument - standard
Product Introduction:
Paper dust meter is suitable for measuring the dust degree of paper or cardboard, books, toilet paper, tissue paper, etc.
The dust degree tester is lightweight in structure, convenient in experiment and equipped with different contrast pictures, and is widely used in major papermaking enterprises, quality inspection centers, press and publication centers and other units.
Test principle:
On each square meter of paper or cardboard, the dust degree is expressed by the number of dust with a certain area or by the equivalent area of dust on each square meter of paper or cardboard.
Technical parameters:
Irradiation Angle: 60°
Table: Effective area of 0.0625 square meters, can be rotated 360°
Standard dust picture: 0.05 —— 5.0（㎜2）
Standard dust comparison diagram: 0.04 —— 5.0（㎜2）
Light source: 20W fluorescent lamp
Power supply: 220V 50Hz
Dimensions: 340mm×360mm×480mm（length × width × height）
Meet the standard:
GB/T1541-2007 Paper and board dust determination
Standard configuration:
Main engine, standard dust map, comparison map
Send product request
Other supplier products
 |
Profilometer | Product Introduction: The profiler is measured by the slip of the stylus of the instrument and the surface to be measured, and is a contact measur... |
 |
KES - FB2 - A Bending Tester | Content The Pure Bending Tester analyzes hand movements-referred to as “bending”-performed by artisans and professionals when judgin... |
 |
Medical Mask Differential Pressure Tester EN 149 EN 14683 | Standards: EN 149. EN 14683. ASTM F2100. MIL-M-36954C, GB 19083. GB 2626. YY/T 0969-2013 Applications: Medical Mask Differential Pressure Tester... |
 |
UV Viewing Cabinet | Scope of application: Coatings and paints: Used to test phosphors in various substances such as plastics, paints and coatings Aluminum foil: Used... |
 |
Large diameter blasting test machine | Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurable... |
Same products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Seller: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
