Tester for Shear Force and Friction of Protrusions on Helmet Surface
Tester for Shear Force and Friction of Protrusions on Helmet Surface - Material and Parts of Automotive - standard
Standards:
ECE R22.06, GB811 - 2022
Applications:
The Shear Force and Friction Tester for Helmet Surface Protrusions is mainly used to test the shear force and friction performance of the protrusion structures on the helmet surface.
Product Information:
Technical Parameters
1. This testing machine can conduct tests on the protruding areas and surface friction. 2. Impact weight: 15kg 3. Free - fall height: 500mm 4. Weight of the loading mechanism: 400N (40.8kg) 5. The release mechanism is controlled by an electromagnet. 6. Sandpaper or shear blocks can be installed on the horizontal guide frame for linear friction with the shear surface of the helmet. 7. The device for installing the head model is adjustable.
Send product request
Other supplier products
 |
Cold Fold Tester Chrysler | Standards: LP-463-KB-28-01 Method A Applications: This tester is applied to the cold fold test based on Chrysler method and can measure the resi... |
 |
Zipper Reciprocating Tester | IntroductionZipper reciprocating tester is used to measure the zipper performance of products with zippers, such as clothes, textiles, auxiliary ma... |
 |
Snap Button Tester | Testing Standards: ASTM D7142-2/F963, CFR 1500, EN 71 PART 1, GB 6675, ISO 8124, M&S P115A Applications: Snap Tester is used to evaluate t... |
 |
Fully Automatic Closed Mouth Flash Point Tester | Meet the standard: ASTM D93 ISO 2719 IP 34 ASTM D7236 Product Introduction: The flash point is a critical parameter for classifying flammab... |
 |
Bio-absorbable Internal Fixation Plates and Screws Tester | Standard YY/T 0509-2009 (China): Specifies mechanical testing protocols for orthopedic plates/screws made of hydrolyzable polymers, including ax... |
Same products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Seller: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
