Shoelace eye wear testing machine
Main uses:
The shoelace eye wear testing machine is mainly used to test the wear resistance of shoelace and shoe eye under repeated friction. The device evaluates its durability and service life by simulating the friction action of the shoelace against the eye of the shoe during actual use. The test results can be used for the quality control of footwear manufacturing enterprises, the research and development of new shoe types and the performance testing of footwear products by quality inspection institutions.
Meet the standard:
SATRA TM93
DIN4843
QB/T 2226
SATRA TM 154
BS 5131:3.6:1991
ISO22774
Technical parameters:
Sample group number: generally multi-group, such as 6 groups, in order to test multiple samples at the same time, improve work efficiency.
Test speed: indicates the moving speed of the fixture during the test, generally 60±3 times/min or 100±5 times/min, the specific speed can be set according to the test requirements and standards.
Test times: A wide range of test times can be preset, such as 0-99999999 times, to ensure that various test needs can be met. During the test, the device automatically stops when the preset number of times is reached.
Test load: Used to simulate the tension of shoelaces during use, generally 250g or 455±5g, the specific load can be set according to test requirements and standards.
Send product request
Other supplier products
 |
G631A electric shoe stripping testing machine | Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the principle is to load the... |
 |
Button Sewing Machine | Applications Be applicable to Button-attaching for ordinary button with two or four holes. Shanked button and others are also can be sewed with ac... |
 |
Paper stiffness meter | Paper stiffness meter - Other test instrument - standard Product Introduction: ZY-TDY300 microcomputer bending stiffness tester is used to measur... |
 |
Safety Helmets Acceleration Impact & Penetration Tester/ Helmet acceleration impact tester / helmet impact penetration tester | Standard GB/T 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-1 (Industrial Safety Helmets – Impact Absorp... |
 |
Fabric Friction Charging Charge Tester | Standards: JIS L-1094; JIS T-8118; ZB W 04008-89; GB / T12703.2-2009; GB 12014-2009; GB / T23316-2009 Applications: Friction Charging Test... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
