Electric notch machine
Plastic electric notch prototype is a cantilever beam, simply supported beam impact testing machine to do the impact toughness test of non-metallic materials used in the notch sample sample production equipment, impact notch prototype equipment can be used in scientific research institutions, colleges and universities, non-metallic materials production plants and other units of the laboratory to make notch samples.
Reference standard:
ISO 180-2000 "Plastics - Determination of impact strength of rigid cantilever beams"
GB/T 1843-2008 "Rigid plastic cantilever beam impact test method"
JB/T 8761-1998 "Plastic Cantilever beam Impact Testing Machine"
ASTM D256-2010 "Test Method for Determining the Impact Strength of IZOD Pendulus in Plastics"
ISO 179-2000 "Plastics - Determination of impact strength of simple supported beams of Hard materials"
GB/T 1043-2008 "Rigid plastic simple supported beam impact test method"
JB/T 8762-1998 "Plastic Simply supported beam Impact Testing Machine"
Technical parameters:
Table stroke: >160mm
Feed speed: 30mm/min
Sample type: Type 1, type 2, type 3
Notch type: Type A, Type B （optional）， Type C （optional）
Send product request
Other supplier products
 |
Rapid crack growth testing machine/ Rapid Crack Growth Resistance Tester / High-Speed Crack Propagation Tester | Standard ISO 13477: Designed exclusively for determining critical pressure (Pc) and temperature (Tc) in polyethylene pressure pipes during rapid... |
 |
Safety Helmets Acceleration Impact & Penetration Tester/ Helmet acceleration impact tester / helmet impact penetration tester | Standard GB/T 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-1 (Industrial Safety Helmets – Impact Absorp... |
 |
Methyl Polysilazane Precursor Ceramic Resin STD-8808 | Introduction STD8808 is a side-methyl 100% solid-content polysilazane resin that rapidly cures via heating. The cured resin exhibits excellent adh... |
 |
HIGH SPEED LOCKSTITCH BAR TACKING MACHINE | Applications: High Speed Lockstitch Bar Tacking Machine is applicable to for various types fabric and thickness, suitable for light and medium w... |
 |
Absorbable Bone - connecting Plates Four - point Bending Tester | Standard ASTM F2119: Standard test method for constant load testing of bioabsorbable screws and washers, applicable to bending performance evalu... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
