ICI Mace Snag Test machine
Standards:
ASTM D3939 Standard Test Method for Snagging Resistance of Fabrics (Mace Test Method) GB/T 11047 Textiles-Determination of fabrics snagging resistance-Mace test method JIS L1058 Test methods for snag of woven fabrics and knitted fabrics
Applications:
Theinstrument is equipped with an observation box and the comparison pattern card with different fabric structure. It is equipped with four test rolls ( for putting on the fabric to be tested). The mace ball is a tungsten carbide head and is controlled by a predetermined electronic counter.
Product Information:
ICI Mace Snag Tester is suitable for the snagging performance test of knitted fabrics and woven fabrics in outwear as well as other fabrics easy to snag , especially for chemical fiber filament yarn and its deformation yarn products. It can quickly detect the fabric snagging tendency under normal wearing condition (namely snagging the yarn out from the fabric).
Working Principle
The cylindrical specimen is placed on the revolving drum, and a chained hammer is placed on the surface of the specimen. When the drum rotates at a constant speed, the nail hammer makes random flip and bounces on the sample surface to hook the sample. The sample surface produces snagging. After the specified number of revolutions, compare with the comparison snag Lattuca for snag rating..
Technical Parameters
·Specimen size: 220mm×330mm;
·Revolving drum diameter: 82mm;
·Revolving drum length: 210mm;
·Mace ball: Tungsten carbide head;
·Mace diameter : 31.8 mm;
·Mace height:135g;
·Mace protruding length: 9.5 mm;
·Mace plant needles: 11 tungsten needles;
·Needle exposed length: 10mm;
·Tip radius: R0.13mm;
·Guide bar working width: 125mm;
·Distance between the hammer and the guide bar：45mm;
·Stations: 4;
·Test speed: 60rpm;
·External dimension: 1007×508×405mm(L×W×H);
·Weight: about 90kg;
·Power supply: 1∮ ，AC220V，50Hz，3A
Accessories
·Snag rating box
·Tungsten carbide crochet hook (12pcs/bag)
·Felt jacket (4pcs/bag)
·Comparison snag Lattuca
Send product request
Other supplier products
 |
Catheter Residual Vacuum Tester | Catheter Residual Vacuum Tester - Other test instrument - standard Main Uses of the Catheter Residual Vacuum Tester The catheter residual vacuum ... |
 |
Photovoltaic module wire tube bending testing machine | Standard IEC 61730-2:2004: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing CE Certification(Conformité Euro... |
 |
Mask Breathing resistance testing machine | Standards: EN149-2009 section 7.15, 8.3.4, EN 13274-3, GB 19083, GB 2626, NIOSH 42 CFR Part 84, JIS/T 8151 Applications: Mask Breathing re... |
 |
Masks Flame Retardant Tester | Standards: GB 19083, YY 0469, GB 2626, EN 149, ISO 9473, EN 14325 Applications: Mask Flame Retardant Tester is a special test instrument f... |
 |
Paper whiteness tester | Paper whiteness tester - Other test instrument - standard Product Introduction: Paper whiteness tester is suitable for the whiteness measurement ... |
Same products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Seller: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
