IULTCS Veslic Leather Abrasion Tester manufacturer
Introduction
This machine is suitable for all types of stain-resistant fur dry and wet rubbing fastness, and various types of fur products and fur leather goods and dual-use lint-free test.
Standards
IS0 11640 Leather-Tests for colour fastness-colour fastness to cycles of to and fro rubbing
SATRA PM 173 Colour fastness to rubbing-reciprocating method
QB/T 2537 Leather-Tests for colour fastness-colour fastness to cycles of to and fro rubbing
GB/T 20991 7.3 Determination of abrasion resistance of insole
EN ISo20344 7.3 Determination of abrasion resistance of insole
AS/NZS 2210.2 7.3 Determination of abrasion resistance of insole
ISO 17700 Method A To and fro square rubbing finger fastness testing Footwear-test methods for upper components and insocks-colour fastness to rubbing
DIN 4843 Safety footwear safety requirements testing
Application
IULTCS Rubbing Color Fastness Tester, designed to carry out a rub fastness test on the surface of leather to determine the amount of "marring"of the leather surface or the finish and to assess the amount of colour transferring from the sample to the rubbing pad under dry or wet conditions.
The unique design of Iultcs Rub Fastness Tester allows reliable and stable test result.
Impact appearance and construction design offers a good shape and convenient operation, also allows a long life time without repairing.
Equipped with an extension device so samples can be extended at a required rate.Two models of single and double test position are offered.
Features
It owns a compact size for the convenience of movement and placement.
A graduated scale is available on the sample holding platform to faciliate extending the specimen manually in the direction of rubbing.
Compatible with wet and dry tests.
One or two test stations in one machine is available.
A microcomputer controls the machine operation.
Fitted with a digital display to set parameters and indicate running status.
The machine is easy for users to use and maintain.
Leather Rub Fastness Test Procedure
1. Mount a conditioned test piece into the machine and stretch it by 10% in the direction of rubbing.
2. Place the weight so that the total mass of the finger can attain 10oog ± 35 g for ordinary leather.
3. Mount a piece of conditioned wool felt to the finger.
4. Place the finger on the leather and conduct the prescribed number of cycles.
5. Repeat the test with the finger at a new position of the test piece if required.
6. In case the pilling effect on the felt occurs, repeat the test.
7.Remove the test piece and evaluate the color fastness of the specimen.
Parameter
Action by: linear motion unidirectional grinding brush
Test speed: 26 times / min
Test area: 200cm², 115.5cm², 111cm²
Test load: 88300 ± 40Pa
Test stroke (adjustable) 270mm, 210mm, 150mm
Count range from 1 to 99999
Machine Size 600mm × 455mm × 232mm (W * D * H)
Send product request
Other supplier products
 |
Automatic dry cleaning tester - Test Equipment | Instrument Purpose The YG-6 Fully Automatic Dry Cleaning Tester is used to evaluate the physical properties of wool, fur, cotton-linen, worsted, a... |
 |
Scott Flex Tester | The Scott Flex Tester is designed to evaluate the flexing and kneading resistance of leather, artificial leather, woven fabrics, and other flexible... |
 |
Test for Flammability of Materials | Thistester is developed base on thestandard AS1530.2. test for flammability of materials. The method is applied to the testing of a thin sheet or w... |
 |
Thermal Protective Performance Tester (TPP) | The Thermal Protective Performance (TPP) Test Device was developed to measure the time elapsed for convective and radiant heat to penetrate through... |
 |
Carpet Flammability Tester - Test Equipment | Instrument Features - Equipped with a measuring grid and a positioning ring - The sliding plate facilitates operation - The mirror enables easy ob... |
Same products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Seller: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
