Safety Helmets Wearing Stability Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Safety Helmets Wearing Stability Tester is designed to evaluate helmet retention and fit under dynamic conditions, simulating real-world head movements and impact scenarios. It provides precise measurement of helmet stability, retention forces, and deformation, ensuring compliance with international and national safety standards. The instrument is suitable for production quality control, R&D, and certification testing of industrial, sports, and cycling helmets.
Application
This tester is suitable for assessing helmet fit stability and retention performance for:
(1) Industrial helmets used in construction, manufacturing, and mining
(2) Cycling helmets for road, mountain, and urban riding
(3) Sports helmets for skating, climbing, skiing, and other high-mobility activities
(4) Motorcycle and E-bike helmets for rider safety certification
(5) R&D of custom helmet designs with adjustable retention systems
Standards
The tester complies with the following standards:
(1) GB 811-2022 – Safety Helmets: General Technical Requirements
(2) GB 24429-2009 – Sports Helmets: Requirements and Test Methods
(3) GB/T 2812 – Safety Helmets: Test Methods
(4) ISO 6220-2 – Industrial Safety Helmets: Fit Stability
(5) CE Certification (Conformité Européenne)
Features
Multi-Standard Compliance: Simulates extreme lateral forces and evaluates retention system integrity.
High-Precision Measurement: 0.1kg load resolution and 0.1N force sensor accuracy for repeatable results.
Dynamic Tilt Testing: 360° tilt mechanism reproduces real-world head movements.
User-Friendly Operation: 7” touchscreen HMI with preloaded GB/T 2812 sequences and real-time force graphs.
Quick-Swap Helmet Clamp: Rapid replacement of helmets for high-throughput labs.
Safety Systems: Dual interlocks and overload protection prevent accidental activation and sensor damage.
Self-Calibrating System: Auto-tare and linearity checks before each test.
Durable Construction: Aircraft-grade aluminum frame and corrosion-resistant sensors ensure long-term reliability.
Parameters
| Parameter | Specification |
|---|---|
| Impact Weight | 10.0kg ±0.1kg (stainless steel) |
| Initial Load | 3.0kg ±0.1kg (adjustable) |
| Release Method | Manual lever with safety interlock |
| Tilt Range | 0–360° (1° resolution) |
| Force Sensor | 0–500N range, 0.1N resolution |
| Data Acquisition | 16-bit resolution, 1,000Hz sampling |
| Power Supply | 220V AC, 50/60Hz (single-phase) |
| Dimensions | 800mm (W) × 600mm (D) × 1,500mm (H) |
| Weight | 150 kg (net) |
Accessories
(1) Testing Kit: 2x universal helmet clamps (adjustable for 50–65 cm heads), 5x calibration grade load cells (10N–500N)
(2) Software Suite: License key for StabilityTest Pro (Windows/macOS), 1-year free access to cloud-based fit analysis tools
(3) Calibration & Safety: NIST-traceable force gauge, 2x safety glasses (EN 166 rated), 1x face shield
(4) Maintenance Kit: Spare accelerometers and load cells, machine cleaning solution (non-corrosive)
(5) Documentation: Multilingual quick-start guide (printed + digital), compliance certificates for GB/ISO standards
Test Procedures
Secure the helmet in the universal clamp and adjust to the correct head circumference.
Select the wearing stability test mode via the touchscreen HMI.
Set impact weight and initial load according to test requirements.
Adjust tilt angle and initiate the motorized tilt stage.
Monitor real-time force graphs and retention performance during rotation.
Export data as PDF or CSV for certification or R&D analysis.
Repeat tests for additional helmets as required.
Maintenance Information
Inspect helmet clamps, tilt mechanism, and load cells regularly; replace worn parts.
Verify calibration of force sensors every six months using NIST-traceable instruments.
Clean frame, clamps, and sensors with non-corrosive solutions to maintain accuracy.
Store the tester in a dry, temperature-controlled environment to prevent corrosion.
Follow standard electrical safety procedures during operation and maintenance.
Send product request
Other supplier products
 |
Minimum Ignition Energy (MIE) – Dust Cloud Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Description： Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust sp... |
 |
IEC 62716 Ammonia Corrosion Test Chamber Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards IEC 62716: Photovoltaic (PV) modules—Ammonia corrosion testi... |
 |
Conveyor Belt Drum Friction Test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum fricti... |
 |
Down Feather Filling Power Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Filling power is one of the most important indicators of down feathers and is the main expr... |
 |
Textile Far - Infrared Radiation Heating Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Textile Far Infrared Radiation Temperature Rise Tester is used for various te... |
Same products
 |
Battery Diaphragm Gas Permeability Tester ISO | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Battery Diaphragm Gas Permea... |
 |
Torsion Testing Tester ASTM, JIS, and DIN | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Universal Torsion Testing Ma... |
 |
Wire Torsion and Winding Tester ASTM and JIS | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Wire Torsion and Winding Tes... |
 |
Metal Wire Repeated Bending Tester ISO/DIS 7801 | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Repeated Bending ... |
 |
Metal Wire Wrap Tester ISO 4101 | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Wrap Tester is de... |
