Helmets Designated Protection Areas Tester
The helmet designated protection area testing device is a piece of equipment used to mark test points and lines on helmets, and is suitable for all testing standards. It can define the upper, lower, left, and right fields of vision of the helmet, ensuring the helmet's effectiveness under different testing standards.
Application
1. Used to mark test points and test lines on helmets.
2. Used for line - marking according to different test standards.
3. Used to define the upper and lower fields of view as well as the left and right fields of view of helmets during research and development.
Standards:
GB 811-2010:Helmets for motorcyclists
Feature:
Infrared emitter;
Aluminum bracket (adjustable);
Angle of infrared bracket can be adjusted;
Aluminum alloy is used in the machine and all the accessories;
Main machine performance characteristics:
Adjustable handles on the arm can be easily adjusted to apply to different testing standards.
The fixed point tracking indicator adopts infrared control, which can be moved on the machine to find the base plane and reference plane easily.
The head support is made of steel with galvanized surface treatment, and there is a limiting device every 45°, which can easily rotate the head in any direction to adapt to different test points and test standards.
Parameters
| Technical Parameter | Description |
|---|---|
| Infrared emitter usage | Adopts infrared emitters |
| Support structure | Uses adjustable aluminum alloy brackets |
| Adjustable angle of infrared bracket | The angle of the infrared bracket can be adjusted |
| Material of machine and accessories | The machine and all accessories are made of aluminum alloy |
| Applicability | Applicable to all standards |
Accessoriess
The following are the names of the accessories for the helmet-designated protection area tester (using a helmet point and protection zone testing device as an example):
Infrared transmitter
Aluminum alloy bracket (adjustable type)
Working arm (with adjustable handle)
Tracking indicator light (infrared controlled)
Head-shaped support (steel with galvanized surface treatment, with limiting device)
Test Procedures
Helmet Installation: Mount the helmet onto the support frame of the testing equipment.
Applying Force: Apply a specific force using a force gauge for the impact test.
Data Recording: According to national standards, record the helmet's impact resistance, including cushioning performance and impact durability.
Testing Field of View and Protection Area: Use a field of view testing component and a laser emitter to test the helmet's field of view angle and protection area.
Data Analysis: Based on the test results, analyze whether the helmet's protective performance meets the requirements specified in the standards.
Send product request
Other supplier products
 |
Scratch tester STD-KK01 | Product introduction: With the continuous expansion of the use of plastic molding products, from the point of view of the surface appearance of mo... |
 |
Carpet Pilling and Fuzzing Tester | Instrument Description This instrument is used to simulate the pilling and fuzzing phenomena that occur during the normal use of carpets. The inst... |
 |
Coatings Shear | Standard YY/T 0856-2011 (China): Specifies mechanical testing protocols for metal angular fixators, including single-compression bending and bendi... |
 |
Diaper Contaminant Detection Machine | Introduction: The diaper impurity detector is used to detect the impurities remaining inside the diaper under a certain strong light irradiation. ... |
 |
Artificial turf wear tester | Standard FIFA Quality Programme: Exceeds 2015/2016 handbook requirements for artificial turf abrasion resistance testing. EN 15330-1: European st... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
