Micro Controll Constant-Speed Friction Plate Tester
A friction and wear testing machine is a device composed of a test force loading system, a friction force measuring system, an experimental clamping system, a temperature measuring system, a spindle system, a lubrication system, and an electrical control system.
Application
microcomputer control fixed-speed friction tester is mainly used to measure the friction coefficient and wear rate of automobile brake linings (brake pads), automobile clutch facings, oil drilling rig brake blocks and a variety of industrial machinery friction pads, motorcycle brake pads and other non-metallic friction materials.
Standards
GB/T5764-1998: brake linings for automobiles.
GB/T5764-1998: clutch facings for automobiles;
GB/T11834-2000: asbestos friction pads for industrial machinery;
SY/T5023-1994: brake blocks for oil drilling rigs.
Feature
Strictly in accordance with the provisions of the GB5763-98 standard, in keeping with the basic principles and structure of Japan's HP-S-type prototype machine based on the combination of modern technology to improve the design and become.
1 electromechanical integration of the whole structure, the user wiring available.
2 force measuring organization force flow in the same plane, completely solve the mechanical vibration problem.
3 gravity code calibration device, so that the measurement is more accurate.
4 stainless steel heating and cooling cover, wet parts of all nickel-plated rust-proof treatment, stainless steel nickel wire heater;
5 pre-furnace assay electric furnace precision casting friction disk.
9 increased cooling fan to prevent water vapor sprayed onto the surface of the friction disk and affect the measurement data.
10 adopted a new way of measuring force, canceled the vibration damping device, improve the measurement accuracy.
11 host and console compact structure, beautiful appearance, can realize the automatic circulation of cold water and drainage.
Parameters
| Items | Details |
|---|---|
| Control System | Independently researched and developed by Jinan. Utilizes a laptop plus lower computer control software for closed-loop control experiments, enabling real-time control of the test process, collection and analysis of test data, automatic processing of test results, and drawing of curve analysis reports. |
| Temperature | Measurement and control range: 0 ~ 260 ℃ (up to 350 ℃); Measurement accuracy: 1 ℃; Measurement error: 5 ℃ |
| Friction | Measurement range: 0 ~ 2000N; Measurement accuracy: 0.2N; Measurement error: 10.0N |
| Mo Disc Rotation | 480 ~ 500r/min; Measurement accuracy: 1 turn; Measurement error: 1 turn |
| Power | Main unit: 7.5kw; Heating pipe: 4.5kw; Fan: 120w (two fans, total 240w considered in total power calculation); Total power: 12.12kw |
| Friction Disk | Material: Gray cast iron HT-250; Brinell hardness: 180~220HB; Pearlite structure |
| Specimen | Not specified |
| Friction Radius | R = 150mm |
| Positive Pressure | 0.49Mpa - 0.98Mpa |
| Loading Weights | 1.25kg - 1 piece; 2.5kg - 3 pieces |
| External Shape Dimensions | Not specified |
| Control Cabinet | 800×600×1000 |
| Weight | About 1000kg |
Accessoriess
The main components of a sliding bearing PV friction testing machine include the headstock, tailstock, tool holder, torque sensor, force sensor, spindle assembly, loading system, linear guide rails, air bellows, and motor.
Test Procedures
Sample Preparation: Load the sliding bearing sample to be tested onto the test rig, ensuring its surface is clean and smooth.
Load Application: Apply a specific force or pressure to the sample surface using the loading system, simulating the load conditions under real working conditions.
Start of Test: Start the test machine control system, controlling the movement speed and load changes of the test rig according to preset conditions, and begin simulating the friction and wear process.
Send product request
Other supplier products
 |
Particle Abrasion Test machine | Industrial Activated Alumina HG/T3927-2007 and other test methods. It is a new generation of products launched after the Q-3 particle wear tester,... |
 |
Carpet Dimensional Stability Tester | Standard ASTM D5417(Standard Test Method for Assessing Carpet Dimensional Stability) ISO 2551(Textile Floor Coverings - Determination of Dimens... |
 |
Rubber non-rotor vulcanization chamber | Product Introduction: Non-rotor vulcanizer is a rubber processing industry control rubber material quality, rapid inspection and rubber basic rese... |
 |
Sliding bearing PV friction testing machine | Standard This machine is mainly applicable to GB 7948-1987 plastic bearing limit PV test method, JB/T 7381-2010 powder metallurgy oil bearing PV v... |
 |
Rupture strength tester | Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 61730: Safety Standard for Photovoltaic M... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
