Autogenous ，Semi-autogenous mill
Introduction
This equipment is modified by our experts and with the features of greatly energy saving, no powder pollution, less floor area and large average daily capacity.
Features
Avoid overgrinding and increase output. Materials and water are fed continuously through the central sleeve of one side of barrel; and the qualified final products are discharged into hopper through end face discharging device.
The production expense and installed power are separately reduced by 70% and 60% compared to that of the traditional equipment.
Dust removal unit, screening factory and screening equipments are leaved out, which reduce civil engineering investment, the floor area and the cost of labor power and management.
The max feeding size is 160mm.
Application
It is used for coarse grinding after coarse crushing.
Working principle
The essential component is a cylinder with bigger diameter and smaller length which is slowly revolved via transmission machinery. Materials are fed into central sleeve where ores are fully grinded due to the falling impact and autogenous grinding. Ore materials, which are eligible for the particle size standard and pass through grid plate, are discharged from another side of central sleeve, with the aid of overflow water.
Technical parameter
model cylinderlength
×width(mm) Effective
Volume
(m3) Processing
Capacity
(t/h) Feed
Particle
size(mm) Cylinder
RPM(r/min) Mainmotor Gross
mass(t)
model power(Kw) RPM(r/min)
ZMJ4014 4000×1400 16 25-35 <350 17 JR138-8 245 735 66
ZMJ5518 5500×1800 41 45-75 <400 15 TDMK800-40/3250 800 150 170
ZMJ6522 6500×2200 69 -- <450 13.2 TDMK1600-40 1600 150 280
ZMJ7525 7500×2500 102 -- <500 12 TM2500-16/2150 2500 375 460
ZMJ8528 8500×2800 150 -- <550 11 TDMK1600-40 1600X2 150 520
Other supplier products
|
|
High-efficiency and multifrequency dewatering screen |
Dewatering is an important process in mineral processing. The purpose of dewatering is to remove water contained in particles. High-efficiency and ... |
|
|
High efficiency agitating tank |
Introduction
High efficiency agitating tank is used for the pulp stirring before the flotation operations, make the pulp fully mixed with the phar... |
|
|
Plate feeder |
Introduction
transporting raw material to the crushing plant, where their combination of reliability and robustness have proven to give many years... |
|
|
Rotary kiln |
Introduction
Rotary kiln is suitable to dry metallic and nonmetallic mineral, clay in cement industrial and coal slime in coal mine, etc. Rotary k... |
|
|
Dry magnetic separator |
Introduction
Magnetic separation is a process in which magnetically susceptible material is extracted from a mixture using a magnetic force. Dry m... |
All supplier products
Same products
