Solid Carbide Rods
Introduction of Solid Carbide Rods
Solid carbide rod is mainly made of tungsten carbide, binder metal cobalt and some other functional ingredients added as formula requires, through materials mixture, extruding, pre-sinter, shape modification producing process then sintered in low pressure. With characters of high hardness, high strength, chemical stable, low expansion coefficient, electric and heat conducting, the sintered tungsten carbide rods are widely applied in industrial manufacture area, for example, to make micro drill in PCB industry, electrode bar in optical community industry, drill, drill stock, tip, pusher, wear resistant precision parts, CNC reamer and blades with coolant hole in machining industry.
As a carbide depot, Toonney tungsten metal plant factory manufactures a large range of tungsten alloy including solid rods, rods with straight/spiral coolant hole, shaped rods according customer’s requirement and T shaped etc.
Solid tungsten carbide rods, no coolant ducts inside. We have 10 grades formula material for most common use, for example, rods for PCB micro drill, micro milling cutter, carbide saw blade, drills to machining aluminum alloy, copper base alloy, steel base alloy and; wolfram carbideetc. We strictly control the quality in each necessary step, we can say good quality is one of advantages which makes us stand in this industry.
Wolfram carbide:Wolfram carbide is a compound composed of wolfram and carbide. It is a black hexagonal crystal with metallic luster, of which hardness is similar to diamond.Wolfram carbide is good conductor of electric and heat, can not dissolves in water,hydrochloric acid or sulfuric acid,but easily to dissolve in mixed solution of nitric acid and hydrofluoric acid. Pure wolfram carbide is fragile, but adding titanium or cobalt and sintered,the roughness will be much higher. Wolfram carbide is also called tungsten carbide.
Tungsten metal/Tungsten metallic:Tungsten is also called wolfram, the most form of tungsten metal in industrial application is tungsten carbide. Toonney tungsten metal factory has produced solid carbide rods for many years and gets good reputation at home and abroad.
Packaging Details:Plastic bag, then protected in foam lay, finally to an outer carton.
Samples Matters:
Solid carbide
rodswhich can be available from our common regular inventory, can be offered as samples for free. For solid carbide rods with irregular customer special required, will be charged. Of course, customers need to pay for the shipping fee. Usually, the lead time of the samples will be within 7working days.
Minimum Order Quantity:There is no minimum order quantity of solid carbide rods for the first trial order. But on the second order, the total amount of solid carbide rods should be not less than 1000 USD.
Delivery Time:7-15 working days
Cutting tools grade table and application
|
Grade |
Co % |
Grain Siz(μm) |
Density(g/cm3) |
Hardness(HRA) |
TRS(N/mm2) |
|
TU90 |
9.0 |
0.2 |
14.35 |
94.1 |
5200 |
|
TF06 |
6.0 |
0.6 |
14.81 |
93.1 |
4000 |
|
TU06 |
6.0 |
0.4 |
14.8 |
94.3 |
4600 |
|
TU08 |
8.0 |
0.4 |
14.52 |
93.5 |
4800 |
|
TU08S |
8.0 |
0.3 |
14.5 |
93.6 |
5000 |
|
TU40 |
10.0 |
0.8 |
14.4 |
91.7 |
4600 |
|
TU40F |
10.0 |
0.6 |
14.45 |
92.3 |
4600 |
|
TU40S |
10.0 |
0.5 |
14.5 |
92.5 |
4800 |
|
TU44 |
12.0 |
0.4 |
14.1 |
92.6 |
4800 |
|
TU25 |
12.0 |
0.6 |
14.06 |
92.5 |
4200 |
|
TU45 |
13.0 |
0.3 |
13.95 |
92.7 |
4800 |
|
TU55 |
13.0 |
0.3 |
13.92 |
92.6 |
4800 |
Recommanded application
|
|
Recommanded application |
|
TU90 |
For cutting tools machining quesnched material(HRC65-70),hardwood and high polishing cutters. Excellent for cutters finish machining 316L stinless steel |
|
TF06 |
For cutting tools machining aluminum magnesium alloy,graphite and composite fiber. |
|
TU06 |
For PCB micro-drill and end mill machining super high harness metals. |
|
TU08 |
For PCB micro-drill,mini milling cutter. |
|
TU08S |
For micro PCB drill, cutting tools for finis machining quenched materials(HRC60-65),316L stainless steel, high polishing metal sheet and silicon steel sheet of motor. |
|
TU40 |
For common drill bit, end mill and punching die. |
|
TU40F |
For common drill bit, end mill machining titanium alloy, stainless steel and gray cast iron. |
|
TU40S |
For cutting tools machining 316L stainless steel, best material for common circular cuctters. |
|
TU44 |
For cutting tools machining titanium alloy, heat resistant alloy, stainless steel, quesnched steel(HRC55 and above),gray cast iron. |
|
TU25 |
For cutting tools machining heat treated steel(Hardness HRC45 and above),cast iron, stainless steel. |
|
TU45 |
For cutting tools machining titanium, heat resistant alloy, stainless steel, quesnched steel(HRC60 and above) |
|
TU55 |
Grade with high red-hardness, good for cutting tools machining high temperature resistant alloy, quenched steel(HRC60 and above) and titanium alloy |
Specification ofSolid Carbide Rods
|
Dia.Ø mm |
Tolerance.（mm） |
Length（mm） |
Tol.（mm） |
Dia.Ø（mm） |
Tolerance.（mm） |
Length（mm） |
Tol.（mm） |
|
2.0 |
+0.30/+0.15 |
330 |
1.5 |
16.5 |
+0.8/+0.3 |
330 |
1.5 |
|
2.5 |
+0.30/+0.15 |
330 |
1.5 |
17.0 |
+0.8/+0.3 |
330 |
1.5 |
|
3.0 |
+0.50/+0.30 |
330 |
1.5 |
17.5 |
+0.8/+0.3 |
330 |
1.5 |
|
3.5 |
+0.50/+0.30 |
330 |
1.5 |
18.0 |
+0.8/+0.3 |
330 |
1.5 |
|
4.0 |
+0.50/+0.30 |
330 |
1.5 |
18.5 |
+0.8/+0.3 |
330 |
1.5 |
|
4.5 |
+0.50/+0.30 |
330 |
1.5 |
19.0 |
+0.8/+0.3 |
330 |
1.5 |
|
5.0 |
+0.50/+0.30 |
330 |
1.5 |
19.5 |
+0.8/+0.3 |
330 |
1.5 |
|
5.5 |
+0.50/+0.30 |
330 |
1.5 |
20.0 |
+0.8/+0.3 |
330 |
1.5 |
|
6.0 |
+0.50/+0.30 |
330 |
1.5 |
20.5 |
+0.8/+0.3 |
330 |
1.5 |
|
6.5 |
+0.50/+0.30 |
330 |
1.5 |
21.0 |
+0.8/+0.3 |
330 |
1.5 |
|
7.0 |
+0.50/+0.30 |
330 |
1.5 |
21.5 |
+0.8/+0.3 |
330 |
1.5 |
|
7.5 |
+0.50/+0.30 |
330 |
1.5 |
22.0 |
+0.8/+0.3 |
330 |
1.5 |
|
8.0 |
+0.50/+0.30 |
330 |
1.5 |
22.5 |
+0.8/+0.3 |
330 |
1.5 |
|
8.5 |
+0.50/+0.30 |
330 |
1.5 |
23.0 |
+0.8/+0.3 |
330 |
1.5 |
|
9.0 |
+0.60/+0.30 |
330 |
1.5 |
23.5 |
+0.8/+0.3 |
330 |
1.5 |
|
9.5 |
+0.60/+0.30 |
330 |
1.5 |
24.0 |
+0.8/+0.3 |
330 |
1.5 |
|
10.0 |
+0.60/+0.30 |
330 |
1.5 |
24.5 |
+0.8/+0.3 |
330 |
1.5 |
|
10.5 |
+0.60/+0.30 |
330 |
1.5 |
25.0 |
+0.8/+0.3 |
330 |
1.5 |
|
11.0 |
+0.60/+0.30 |
330 |
1.5 |
25.5 |
+0.8/+0.3 |
330 |
1.5 |
|
11.5 |
+0.60/+0.30 |
330 |
1.5 |
26.0 |
+0.8/+0.3 |
330 |
1.5 |
|
12.0 |
+0.60/+0.30 |
330 |
1.5 |
26.5 |
+0.8/+0.3 |
330 |
1.5 |
|
12.5 |
+0.60/+0.30 |
330 |
1.5 |
27.0 |
+0.8/+0.3 |
330 |
1.5 |
|
13.0 |
+0.60/+0.30 |
330 |
1.5 |
27.5 |
+0.8/+0.3 |
330 |
1.5 |
|
13.5 |
+0.60/+0.30 |
330 |
1.5 |
28.0 |
+0.8/+0.3 |
330 |
1.5 |
|
14.0 |
+0.70/+0.30 |
330 |
1.5 |
28.5 |
+0.8/+0.3 |
330 |
1.5 |
|
14.5 |
+0.70/+0.30 |
330 |
1.5 |
29.0 |
+0.8/+0.3 |
330 |
1.5 |
Send product request
Other supplier products
 |
Heading Die | Introduction of Heading Die The application in cold heading die area is one of the main applications of tungsten carbide material. Heading die... |
 |
Customized Tungsten Carbide Products | Introduction Toonney has a professional technical team, who can help to create new materials and find new way to produce difficult items base on y... |
 |
Carbide Rods | Product category:Toonney Tungsten Carbide Rod Manufacturer can offer solid tungsten carbide rod, carbide rod with coolant hole(one straight hole, t... |
 |
Sintering HIP Furnace | IntroductionBase on years' experience and professional in manufacturing tungsten carbide materials, Toonney sintering furnace plant improves curren... |
 |
Sintering Furnance | IntroductionBase on years' experience and professional in manufacturing tungsten carbide materials, Toonney sintering furnace plant improves curren... |
Same products
 |
The Ultimate Tool for Bubble-Free Displays | Seller: Shenzhen Wikshu Technology Co. | FORWARD FW-16R Bubble Remover and FW-8R Mini Bubble Removal Machine removes screen OCA bubbles du... |
 |
Precision CNC Lathe With Conjoined Oblique Rail Cutter Tower | Seller: Zhejiang Guoyu CNC Machine Tool Co., Ltd. | Technical Characteristics: 45° slant bed base structure, with strict aging treatment, smooth ... |
 |
Rail Welder A Frame aligners railway welding tools | Seller: 834406 | 产品描述 A型车架 A-Frame 是一种导轨对准器，可精确对准要焊接的导轨。该设备在焊接操作期间将导轨固定到位。 |
 |
2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system | Seller: 824681 | What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm... |
 |
Horizontal Machining Center | Seller: Xilong (Shanghai) Machine Tool Co., Ltd. | Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ... |
