Automaitc Coil Winding Machine

• 

What are the most common problems with automatic coil winding machine and what are the using techniques?

There are four common problems with thecoil winding machine: flatness -- winding number -- polarity ---- wounding coil

1. The factors affecting the flatness:

1). Equipment problems:

A. The machine runs unstably, shake and swing. -- Please repair and maintain the machine.

B. The winding axis centration is different from that of the main axis, and it swings when rotating. -- The installation work is unreasonable and the shaft is not completed.

C. The outlet is too big, and the coil can swing freely in a wide range. -- The outlet is not suitable.

D. The size of the spool is not matched with the hole in the rubber shell. -- The tool does not match the material.

2). Setting and adjusting problems:

A. The starting point: set it in accordance with the position of the rubber shell on the spool. And adjust slightly in the real work in accordance with the testing effect.

B. Width: set it in accordance with the winding groove width of the rubber shell. And adjust slightly in the real work in accordance with the testing effect.

C. Coil diameter: the rough coil diameter is the total width of a certain section divided by the total winding number.

D. Tension: the dynamic tension of the coil winding should be moderate. It will affect the coil overall uniformity if the tension is too large or too small.

E. The outlet is too far away from the rubber shell. The coil free swing range becomes large because of inertia, the control of the coil is weakened. The distance between the outlet and the rubber shell should be treated differently: the coil will be more orderly when the coil diameter is larger.

F. The coil frame is loose, and it wobbles with the wiggle of the coil.

3). Use problem: the rubber shell is not inserted in position or moved when winding.

2. The factors influencing winding number:

1). Machine settings: be more careful when a winding is completed in multiple segments; There may also be an impact on a slow machine without stopping.

Other supplier products

	Tube Cutting Machine	As the advancement of scientific technology, tube cutting machine bring forth the new through the old, with increasing varieties. According to the ...
	Twist Tie Machine	Several kinds of winding methods commonly used for twist tie machines Twist tie machine meets the packaging requirements of unitized goods storage...
	BJ-3000F Full-automatic Wire Strip & Terminal Crimp Machine	Technical parameters ofBJ-3000F Full-automatic Wire Strip & Terminal Crimp Machine Type Automaticcomputersingleheadterminalcrimping...
	AL-505 SERIES Label Dispensing Machine	Operation Video ofAL-505 SERIES Label Dispensing Machine Features of AL-505 SERIES Label Dispensing Machine Ideal for small labels and small ...
	Label Cutting Machine With Cold & Hot Cutting BJ-07N	Description of With Cold & Hot Cutting BJ-07N Model: BJ-07N with Memory Knife: Hot & Cold cutting CUT LENGTH (mm): 1-99999mm MAX CUT WI...

Same products

	2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system	Seller: 824681	What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm...
	Horizontal Machining Center	Seller: Xilong (Shanghai) Machine Tool Co., Ltd.	Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ...
	Horizontal Lathe	Seller: Xilong (Shanghai) Machine Tool Co., Ltd.	As a professional horizontal lathe manufacturerand horizontal lathe factory, Sealion Machine Tool...
	Gantry Machining Center	Seller: Xilong (Shanghai) Machine Tool Co., Ltd.	SEALION supplies Gantry Machining Center both tables moving type or gantry moving type. Gantry ty...
	Floor Type Boring Mill	Seller: Xilong (Shanghai) Machine Tool Co., Ltd.	Floor Type Boring Mill is suitable for large size jobs to do milling, boring, drilling, etc. The ...