automatic stirrup bender machine (KZ16BX)
automatic stirrup bender machine (KZ16BX),reduce cost Stirrup bender,saving time Stirrup bender,saving effort Stirrup bender
reduce cost Stirrup bender
saving time Stirrup bender
saving effort Stirrup bender
Stirrup bender is designed to complete straightening,bending and cutting on one machine. Coil is the prefer raw material choice .The machine is capable of providing our clients the most accurate cutting , straightening, bending and high effect, which is widespread used in high speed railway, bridge, real estate, reinforcing steel processing factories , etc.
|
Model |
KZ16BX |
|
|
Raw material |
coil |
|
|
Production capacity |
Single wire |
φ6 -16 (mm) |
|
Double wire |
φ6-12 (mm) |
|
|
±180° (double direction) |
||
|
1200 (°sec) |
||
|
100 (m/min) |
||
|
Mandrel diameter |
φ25 -φ40(mm) |
|
|
2500 (mm) |
||
|
150 (mm) |
||
|
Length tolerance |
± 1 (mm) |
|
|
Bending tolerance |
±1° |
|
|
Average air-compressed consumption |
12 (l/min), ≥0.9Mpa |
|
|
Average eleetric power consumption |
17 (kw) |
|
|
Labeled electric power |
68 (kw) |
|
|
Voltage |
380 (V) – 50 (Hz) |
|
|
Overall machine weight |
7,000 (Kg) |
|
|
Overall dimension |
12,000 * 2650 * 3000 (mm) |
|
Stirrup Bending MachineProduct Advantages
Steel Bending Machine Principle
The wire rod steel bar is firstly conveyed to the bending mechanism of the steel bar bending machineafter horizontal straightening and vertical straightening, and then conveyed to the bending mechanism of the steel bar bending machine, and the flexible bending of the wishing elbow is controlled by the PLC program to quickly realize the bending forming process of the various shapes of the stirrups. Then, the finished product of the stirrup is cut by the steel cutting mechanism. The entire process is fully automated and requires no human intervention.
Send product request
Other supplier products
 |
Space saving Integrated Rebar Cutting | A perfect Combination of rebar shear line &rebar bending center Highlights:This production line is a perfect combination of rebar shearing l... |
 |
Threading Machine | This machine is designed for the steel bar end threading processing，it can finish the thread processing according to request and increase the en... |
 |
rebar shear-line Factory | This cutting machine is used to cut high-tensile steel bars of big diameter into expected-length pieces which will be then sorted and stored, al... |
 |
Stirrup Bender Factory | Stirrup bender is designed for complete straightening,bending and cutting on one machine. Coil is the prefer raw material choice, but SKZ is the... |
 |
bridge Stirrup Bender | Grid arch ，as a kind of tunnel arch is commonly used in highway, railway tunnel, and the initial support in mine roadway construction . However,... |
