tungsten carbide insert IADC537 rock bit 7 1/2'' tricone bit for drilling
| Size of Rock Bit | 7 1/2 inch |
| 190mm | |
| IADC Code | 537 |
| Thread Connection | 4 1/2REG |
| Operating Parameters | |
| WOB (Weight On Bit) | 0.35-1.05 |
| RPM | 110-40 |
| Formation | Low compressive strength, medium hard formation with hard abrasive interlayer, like Hard shale, anhydrite, soft limestone, sandstone, dolomite with mezzanine, etc |
Cutting Structure
The wear-resistance of the teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for the steel tooth bit.The durability of premium tungsten carbide inserts is improved with new formulas and new techniques for insert bit
Gauge Structure
Multiple gague protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone,tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capacity and bearing life.
Bearing Structure
High precision journal bearing with two thrust faces,Balls lock the cone.Hardfaced head bearing surface.Cone bearing inlaid with friction-reducing alloy and then silver-plated.Abrasion resistance and seizure of the bearing are improved.and suitable for high rotary speed
Seal and Lubrication
The advanced metal seal package consists of two metal seals and two elastic energizers.Compressed energizers ensure good contact being kept on two sealing surfaces of metal rings by elastic force,and achieves the bearing seal.In the drilling,metal seals are relatively dynamic,and the energizers are static.This will improve the reliability and durability of bearing seal.The pressure compensator system and advanced grease can greatly increase the lubricating reliability.
Send product request
Other supplier products
 |
7 7/8" IADC537 tci tricone bit for water drilling | BasicalParameter Bit Size 7 7/8"(200MM) IADC Code 537 Connection 4 1/2"API reg pin R... |
 |
Tricone bit manufacture 311mm IADC537 tci tricone bit | BasicalParameter Bit Size 12 1/4"(311.1MM) IADC Code 537 Connection 6 5/8"API reg pin ... |
 |
water well drilling three-cone 8 3/8" iadc127 tricone bit | BasicalParameter Bit Size 8 3/8"(212.7MM) IADC Code 127 Tooth Type Steel /Milled Tooth ... |
 |
Tricone bit manufacture 406.4mm tci IADC537 drilling bit | BasicalParameter Bit Size 16"(406.4MM) IADC Code 537 Connection 7 5/8"API reg pin Rotary... |
 |
Sealed bearing 11 5/8 inch steel tooth milled tooth well drilling bit | BasicalParameter Bit Size 11 5/8"(295.3MM) IADC Code 127 Tooth Type Steel /Milled Tooth ... |
Same products
 |
YZH WHEN1510 Stationary Pedestal Rockbreaker Boom | Seller: Shandong Yirun Foundation Engineering Co., Ltd | Below is a detailed introduction to the YZH WHEN1500 fixed hydraulic demolition arm, covering its... |
 |
YZH WHEN1410 Stationary Pedestal Rockbreaker | Seller: Shandong Yirun Foundation Engineering Co., Ltd | YZH WHEN1410 Stationary Pedestal Rockbreaker is a specialized equipment designed for secondary cr... |
 |
YZH WHEN 1300 Stationary Pedestal Rockbreaker | Seller: Shandong Yirun Foundation Engineering Co., Ltd | The Features of the WHEN 1300 Stationary Pedestal Rockbreaker: Intelligent Multi-Mode Control: S... |
 |
WHE1500 Pedestal Breaker Boom Systems | Seller: Shandong Yirun Foundation Engineering Co., Ltd | The Features of WHE1500 Pedestal Breaker Boom Systems: The WHE1500 Pedestal Breaker Boom System ... |
 |
WHEN1850 boom breaker | Seller: Guangxi YZH Machinery Equipment Co.Ltd | A high-performance crushing equipment is crucial in the secondary crushing process of industries ... |
