Tricone bit manufacture 152.4mm tci IADC537 drilling bit
| Size of Rock Bit | 6INCH |
| 152.4mm | |
| IADC Code | 537 |
| Thread Connection | 3 1/2API REG PIN |
| Operating Parameters | |
| WOB (Weight On Bit) | 0.5-1.05 |
| RPM | 110~40 |
| Formation | Hard formation with high compressive strength ,such as limestone,sandstone,dolomite,hard gypsum,marble,etc. |
Cutting Structure
The wear-resistance of the teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for the steel tooth bit.The durability of premium tungsten carbide inserts is improved with new formulas and new techniques for insert bit
Gauge Structure
Multiple gague protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone,tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capacity and bearing life.
Bearing Structure
High precision journal bearing with two thrust faces,Balls lock the cone.Hardfaced head bearing surface.Cone bearing inlaid with friction-reducing alloy and then silver-plated.Abrasion resistance and seizure of the bearing are improved.and suitable for high rotary speed
Seal and Lubrication
The advanced metal seal package consists of two metal seals and two elastic energizers.Compressed energizers ensure good contact being kept on two sealing surfaces of metal rings by elastic force,and achieves the bearing seal.In the drilling,metal seals are relatively dynamic,and the energizers are static.This will improve the reliability and durability of bearing seal.The pressure compensator system and advanced grease can greatly increase the lubricating reliability.
Send product request
Other supplier products
 |
IADC127 5 3/4" Steel Tooth Tricone Drill Bit | BasicalParameter Bit Size 5 3/4"(146.1MM) IADC Code 127 Tooth Type Steel /Milled Tooth ... |
 |
14 3/4'' tungest carbide insert tci tricone rock bit with metal or rubber sealed bearing | Cutting Structure The wear-resistance of the teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for the steel tooth... |
 |
IADC127 6 1/4" steel tooth tricone bit for water well drilling | BasicalParameter Bit Size 6 1/4"( 158.7MM) IADC Code 127 Tooth Type Steel /Milled Tooth ... |
 |
6" Rock drilling bit for hard formation manufacturer TCI tricone bit | BasicalParameter Bit Size 6"(152.4MM) IADC Code 537 Connection 3 1/2"API reg pin Rotar... |
 |
tungsten carbide insert IADC537 rock bit 7 1/2'' tricone bit for drilling | Size of Rock Bit 7 1/2 inch 190mm IADC Code 537 Thread Connection 4 1/2REG Operating Parameters WOB (Weight On Bit) 0.35-1.05 RPM ... |
Same products
 |
YZH stationary hydraulic rock breaker | Seller: Guangxi YZH Machinery Equipment Co.Ltd | As clearly shown in the on-site work images, the YZHstationary hydraulic rock breaker is efficien... |
 |
YZH WHEN1510 Stationary Pedestal Rockbreaker Boom | Seller: Shandong Yirun Foundation Engineering Co., Ltd | Below is a detailed introduction to the YZH WHEN1500 fixed hydraulic demolition arm, covering its... |
 |
YZH WHEN1410 Stationary Pedestal Rockbreaker | Seller: Shandong Yirun Foundation Engineering Co., Ltd | YZH WHEN1410 Stationary Pedestal Rockbreaker is a specialized equipment designed for secondary cr... |
 |
YZH WHEN 1300 Stationary Pedestal Rockbreaker | Seller: Shandong Yirun Foundation Engineering Co., Ltd | The Features of the WHEN 1300 Stationary Pedestal Rockbreaker: Intelligent Multi-Mode Control: S... |
 |
WHE1500 Pedestal Breaker Boom Systems | Seller: Shandong Yirun Foundation Engineering Co., Ltd | The Features of WHE1500 Pedestal Breaker Boom Systems: The WHE1500 Pedestal Breaker Boom System ... |
