600m Drilling depth Factory Price Water Well Drilling
- adopts full hydraulic control, the top drive drives the drilling tool to rotate, and the drilling efficiency is high.
- Using Cummins 113kw generator, strong power and long service life. Oil pump imported from Italy, 3 oil pumps
- The overall layout is reasonable, and the traction or all-ground chassis is used for transportation, with good maneuverability.
- It is very flexible on difficult roads, and can be widely used in hydrological well resource exploration, coalbed methane, shallow shale gas, geothermal and other fields, and can also be used in coal mine gas mining and salvage work.
- The main shaft of the top-mounted drive head has a large diameter, which is suitable for various construction operations such as mud drilling, air drilling, and air foam drilling, and meets the drilling needs of different formations.
- The independent heat dissipation dual system adopts hydraulic oil temperature cooling and is equipped with traditional air cooling. long engine life
- Dual system: 1. Air power system with air compressor 2. Mud pump system with mud pump.
Optimal Hole Range: φ140-350
Hole depth.Max: 600m
| The weight （T） | 11.5 |
|---|---|
| The hole diameter （mm） | 140-350 |
| Drilling depth （m） | 600 |
| One-time advance length （m） | 6.6 |
| Walking speed （km/h） | 2.5 |
| Climbing angles （Max.） | 30 |
| Equipped capacitor （kw） | 113 |
| Using air pressure （MPA） | 1.7-3.5 |
| Air consumption （m³/min） | 17-42 |
| Swing speed（rpm） | 45-130 |
| The penetrationefficiency （m/h） | 15-35 |
| Drill pipe diameter （mm） | φ102 φ108 φ114 |
| Drill pipe length （m） | 1.5m 2.0m 3.0m 6.0m |
| Rig lifting force （T） | 28 |
| Rapid rise speed （m/min） | 20 |
| Fast feedingspeed （m/min） | 40 |
| Width of loading（m） | 2.85 |
| Hoisting force of winch （T） | 2 |
| Swing torque （N.m） | 8500-10000 |
| Dimension （mm） | 6300×2200×2650 |
| Equipped with hammer | Medium and high wind pressure series |
| High leg stroke （m） | 1.7 |
Send product request
Other supplier products
 |
416T-1 Φ90-115mm Separated DTH Borehole Mining Blasting Drill Rig | This series of separated DTH drill rigs had been mainly operating at middle or small sized quarries, cement mine, open-pit coal mines and prelimina... |
 |
452H Φ90-138mm Integrated Dth Surface Drill Rig | While maintaining high efficiency and low energy consumption, it fulfills rock drilling requirements for holes with diameters of 115mm and 138mm, b... |
 |
D545T Φ115-138mm Integrated Down The Hole Dth Drill Rig | While maintaining high drilling efficiency and low energy consumption, the [equipment/model name] is well-suited to meet rock drilling requirements... |
 |
D545H Φ115-138mm DTH mining Blasthole Drilling Rig | The RuiXin drill rig stands out for its ability to maintain high drilling efficiency while keeping energy consumption low. It perfectly meets the r... |
 |
D535H Φ90-115mm Surface Integrated DTH Drill Rig | This model is equipped with an enlarged screw air end, which is specifically designed to meet the drilling requirements of its optimal aperture ran... |
Same products
 |
YZH WHEN1510 Stationary Pedestal Rockbreaker Boom | Seller: Shandong Yirun Foundation Engineering Co., Ltd | Below is a detailed introduction to the YZH WHEN1500 fixed hydraulic demolition arm, covering its... |
 |
YZH WHEN1410 Stationary Pedestal Rockbreaker | Seller: Shandong Yirun Foundation Engineering Co., Ltd | YZH WHEN1410 Stationary Pedestal Rockbreaker is a specialized equipment designed for secondary cr... |
 |
YZH WHEN 1300 Stationary Pedestal Rockbreaker | Seller: Shandong Yirun Foundation Engineering Co., Ltd | The Features of the WHEN 1300 Stationary Pedestal Rockbreaker: Intelligent Multi-Mode Control: S... |
 |
WHE1500 Pedestal Breaker Boom Systems | Seller: Shandong Yirun Foundation Engineering Co., Ltd | The Features of WHE1500 Pedestal Breaker Boom Systems: The WHE1500 Pedestal Breaker Boom System ... |
 |
WHEN1850 boom breaker | Seller: Guangxi YZH Machinery Equipment Co.Ltd | A high-performance crushing equipment is crucial in the secondary crushing process of industries ... |
