400m Drilling depth New Technology Factory Price Rig Bore Water Well Drilling Machine for Sale
- It is an efficient and multifunctional groundwater drilling equipment, which can be used for drilling water wells, agricultural irrigation wells, geothermal wells and other wells. It is especially suitable for water intake projects in mountainous areas and rock formations.
- The machine can drill holes in different formations (rock layers, mud layers, sand layers), and the maximum aperture can reach 300mm.
- This machine adopts high-torque hydraulic motor power head and brand diesel oil, and the hydraulic control system adopts large-diameter hydraulic cylinder. The brand diesel is protected by a two-stage air filtration system, and the clean air from the air compressor can also be used directly.
- Unique bump design and centralized control operating system are easy to maintain and operate.
- This machine adopts excavator crawler chassis, which has high off-road performance and can also be installed on trucks, with stronger mobility.
- Two gear rotation and feed speed to make it work in soil and rock layers.
- Dual systems can be installed: 1. Air power system with air compressor 2. Mud pump system with mud pump
Optimal Hole Range: φ140-325
Hole depth.Max: 400m
| The weight （T） | 9.2 |
|---|
| The hole diameter （mm） |
140-325 |
| Drilling depth （m） |
400 |
| One-time advance length （m） |
6.6 |
| Walking speed （km/h） |
2.5 |
| Climbing angles （Max.） |
30 |
| Equipped capacitor （kw） |
92 |
| Using air pressure （MPA） |
1.7-3.4 |
| Air consumption （m³/min） |
17-36 |
| Swing speed（rpm） |
66-135 |
| The penetrationefficiency （m/h） |
15-35 |
| Drill pipe diameter （mm） |
φ89 φ102 |
| Drill pipe length （m） |
1.5m 2.0m 3.0m 6.0m |
| Rig lifting force （T） |
24 |
| Rapid rise speed （m/min） |
18 |
| Fast feedingspeed （m/min） |
33 |
| Width of loading（m） |
2.7 |
| Hoisting force of winch （T） |
2 |
| Swing torque （N.m） |
6500-9000 |
| Dimension （mm） |
6000×2000×2550 |
| Equipped with hammer |
Medium and high wind pressure series |
| High leg stroke （m） |
1.4 |
Other supplier products
|
|
430-1 Φ115-152mm Separated DTH Mine Drilling Rig Hole |
This series of separated DTH (Down-the-Hole) drill rigs has been primarily used in small and medium-sized quarries, cement mines, open-pit coal min... |
|
|
845-1 Φ115-165mm Separated Open-pit Down-the-hole Mine Drilling Rig |
This series of separated DTH (Down-the-Hole) drill rigs has been primarily used in small and medium-sized quarries, cement mines, open-pit coal min... |
|
|
500m Drilling depth Full Hydraulic Crawler Mounted Water Well Borehole Drilling Rig |
Traveling device: equipped with new traveling motor and reducer, with long service life.
Hydraulic oil pump: imported from Italy, parallel gearb... |
|
|
260m Drilling depth Crawler Hydraulic Water Well Drill Rig Drill Machine |
1. The drill rig chassis uses a professional walking motor with a gearbox, which has a longer lifespan; 2. The transmission is integrally molded, e... |
|
|
400m high-efficiency and energy-saving crawler-type core drilling rig |
Reliable performance： According to the guidelines for international procurement of key auxiliary equipment, diesel engines, hydraulic pumps, main v... |
All supplier products
Same products
