300m Drilling depth Factory Price Hydraulic Rotary Drilling Rig Machine
- The walking motor has a reducer, which is durable and has a long service life.
- The machine can drill holes in different formations (rock layers, mud layers, sand layers), and the maximum aperture can reach 300mm.
- This machine adopts high-torque hydraulic motor power head and brand diesel oil, and the hydraulic control system adopts large-diameter hydraulic cylinder. The brand diesel is protected by a two-stage air filtration.
Optimal Hole Range: φ140-325
Hole depth.Max: 300m
| The weight （T） | 8 |
|---|
| The hole diameter （mm） |
140-305 |
| Drilling depth （m） |
300 |
| One-time advance length （m） |
6.6 |
| Walking speed （km/h） |
2.5 |
| Climbing angles （Max.） |
30 |
| Equipped capacitor （kw） |
85 |
| Using air pressure （MPA） |
1.7-3.0 |
| Air consumption （m³/min） |
17-36 |
| Swing speed（rpm） |
40-70 |
| The penetrationefficiency （m/h） |
15-35 |
| Drill pipe diameter （mm） |
φ76 φ89 φ102 |
| Drill pipe length （m） |
1.5m 2.0m 3.0m 6.0m |
| Rig lifting force （T） |
18 |
| Rapid rise speed （m/min） |
22 |
| Fast feedingspeed （m/min） |
40 |
| Width of loading（m） |
2.6 |
| Hoisting force of winch （T） |
2 |
| Swing torque （N.m） |
5700-7500 |
| Dimension （mm） |
5900×1850×2200 |
| Equipped with hammer |
Medium and high wind pressure series |
| High leg stroke （m） |
1.4 |
Other supplier products
|
|
350m Drilling depth Water Well Drilling Rig |
Double motor drive rotation, large torque, small size, adjustable speed.
Adopt triple gear pump to ensure the oil pump is durable and reliable.
... |
|
|
600m Global Sales Hydraulic Core Drill Rig |
Reliable performance： According to the guidelines for international procurement of key auxiliary equipment, diesel engines, hydraulic pumps, main v... |
|
|
430-1 Φ115-152mm Separated DTH Mine Drilling Rig Hole |
This series of separated DTH (Down-the-Hole) drill rigs has been primarily used in small and medium-sized quarries, cement mines, open-pit coal min... |
|
|
700m Drilling depth Water well drilling rig |
Each drilling rig is equipped with a baffle on the main arm to protect the oil cylinder;
The diameter of the hole is large, the hole is deep, an... |
|
|
421H Φ90-127mm Surface Mine Infrastructure Construction Integrated Dth Surface Drill Rig |
This model is equipped with a larger two-stage screw air end, which meets the requirements for an optimal hole diameter of 90–115 mm. When dr... |
All supplier products
Same products
