Salt Fog Test Chambers
Salt Fog Test Chambers
Usages:
Salt fog test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends on the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in testing without showing signs of corrosion.
Comply the following standards
GB/T5170.8
GB/T2423.17
Specifications:
Model
ZX-250
Internal dimension (L*W*H)
160*100*50 cm
External dimension
(L*W*H)
230*130*140 cm
Inside and outside material
Both inside & outside are adopting imported P.V.C rigid plastic board, and tank cover uses imported transparent P.V.C. rigid plastic board
Temperature Range
35°C~55°C
Temperature Fluctuations
≤±0.5°C
Temperature Uniformity
≤±2°C
Temperature Equitability
±1°C
Test Chamber Temperature
Salt Spray Method (NSS ACSS)35±1°C
Corrosion-resistant: Testing Method(CASS)50±1°C
Saturated air Barrel Temperature
Salt Spray Method (NSS ACSS)47±1°C
Corrosion-resistant Testing Method(CASS)63±1°C
Brine Temperature
35°C±1°C
Spray Quantity
1.0~2.0 ml / 80cm2 / hour
PH value
Salt Spray Method (NSS ACSS6.5~7.2)
Corrosion-resistant Testing Method(CASS)3.0~3.2
Lab Volume
800L
Brine Tank Capacity
40L
Power
AC220V,30A
Protection Devices
Current discharge protection, over pressure protection, over temperature protection, over load fuse protection
Accessories
Testing Salt/ Measuring tank/ Equipment each 1 set
Other supplier products
|
Thermal Shock Test Chambers (two zones) |
Thermal Shock Test Chambers
Usages:
Used to test various types of materials for their tolerances under condition of heat, cold
Model
ZXGB-80Z
ZXGB... |
|
HAST Test Chambers |
HAST Test Chambers
Usages:
Used to test steam pressure to destroy IC products, diode products, and LED products
Features:
Elegant design appear... |
|
Salt Spray Test Chambers |
Salt Spray Test Chambers
Usages:
Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order... |
|
Rainy Test Chambers |
Rainy Test Chambers
Usages:
The product is suitable for testing the adaptability and reliability of electrical and electronic products, materials,... |
|
Salt Fog Test Chambers |
Salt Fog Test Chambers
Usages:
Salt fog test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to ... |
All supplier products
Same products