WDW-50 electronic universal material testing machine
This product is suitable for testing and analyzing the mechanical properties of various metals, non-metals and composite materials, and can obtain test data such as maximum test force value, fracture force value, yield strength, upper and lower yield strength, tensile strength, compressive strength, elongation at break, tensile modulus of elasticity and bending modulus of elasticity of test materials.
Features:
Safety position and experimental position height arbitrary lock；
Automatic protection when exceeding the maximum load, software limit and electronic limit double protection.
Main technical parameters and specifications:
Maximum test force: 50KN
Accuracy grade: 1 grade (can be customized to 0.5 grade on request)
Test force measurement range: 1% to 100% FS throughout the whole process without sub-grade
Relative error of the test force value: ±1% or less
Test force resolution: 1/±300000 of the maximum test force throughout the resolution remains unchanged
Deformation measurement range: 0.2%～100%FS
Relative error of deformation value: within ±0.5% of the indicated value
Deformation resolution: 1/±300000 of the maximum deformation
Relative error of displacement value: within ±0.5% of the displayed value
Displacement resolution: 0.025µm
Force control rate adjustment range: 0.01~5%FS/S
Relative error of force-controlled rate: within ±1% of the set value
Deformation rate adjustment range: 0.02~5%FS/S
Relative error of deformation control rate: within ±1% of the set value
Cross-beam speed adjustment range: 0.01～500mm/min
Control range of constant force, constant deformation and constant displacement: 0.5%～100%FS
Control accuracy of constant force, constant deformation and constant displacement: within ±1% of the set value when the set value is <10%FS; within ±0.1% of the set value when the set value is ≥10%FS
Effective tensile space (without fixture): 800mm
Effective test width: 400mm
Host size: 900 × 500 × 1900 (mm)
Power supply: 220V±10%, 750W
Host weight: about 260kg
Send product request
Other supplier products
 |
Vicat instrument | The cement consistency setting time tester meets the standard requirements of GB/T1346-2001 "water consumption, setting time, stability test method... |
 |
TSY-2000A constant loading pressure testing machine (large frame) Jinhua type | This product is suitable for the compressive strength test of brick, stone, cement, concrete and other materials, and can also be used for the comp... |
 |
FZ-31 Boiling Box | This equipment is one of the commonly used equipment in cement production, construction, scientific research and testing units. The equipment is ma... |
 |
Curing Room Three-piece Set | The product is suitable for cement plant, construction units, highway and bridge engineering units and relevant scientific research and quality ins... |
 |
LDWS-50 Constant Temperature And Humidity Curing Controller (ultrasonic atomization) | This product is suitable for the maintenance of large quantities of concrete,cement products and other test pieces in various laboratories,which in... |
Same products
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | Seller: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM Card Tester is used to detect SIM card circuits and supports dual-SIM detection ... |
 |
HCV1500 High-precision Voltage Sensor | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500 high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and vari... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
