Friction Charging Tester

• 

Friction charged charge tester

Friction Charging Testeris the antistatic fabric and knitted fabric friction generated by the amount of charged charge test equipment, used to measure the amount of static electricity charge.

Standards compliant:
JIS L-1094;
JIS T-8118;
ZB W 04008-89;
GB / T12703.2-2009;
GB 12014-2009;
GB / T23316-2009

Calculation formula:
Q = CV / A
Here, C: the charge amount of the capacitor (F) = 0.1 × 10-6 (F)
V: Voltage reading of potentiometer (V)
A: friction area of ​​sample (m2) = 0.25 × 0.25 (m2)

Steps:
1, connecting the Faraday tube and the amount of charge measurement device: the end of a dedicated cable connected with the input of the charge meter connected to the other end of the Faraday tube with the outer cylinder of the socket connection.
2, turn on the charge amount of the tester power - the power switch up to the "1" position.
3, press the "clear" button, so that the charge meter shows the number is zero.
4, with a roller friction machine friction test, immediately after the end of the friction with the insulation rods into the Faraday tube tube inside the tube. In this process the specimen and other objects should be kept above 300mm.
5. Read the reading on the charge quantity measuring device.

Friction Charging TesterNote:

• 1, the system of Faraday tube outer cylinder should be reliably grounded.
• 2. Clear the charge amount measurement unit before each measurement.
• 3, the measured object must be measured from the power supply.
• 4, before the test, please turn on the power switch to make the machine warm up for 15 minutes.
• 5, voltage / current generator is not to sell goods.

• Fabric Friction Charging Charge Tester:

  Voltage meter (R8240): 1 set
  Capacitor: 1 set
  Cable (A01009-200): 1 root
  Connection cable (A01009-50): 1 root
  Power supply-type strip in addition to the electrode: 1 root
  Friction abutment / ground pad (nylon friction cloth): 1 set
  Insulated rods (20Φ x 500L mm acrylic clear fiber): 1 root
  Certificate of proof of voltage meter (traceability): 1 book

Other supplier products

	Dry Cleaning & Washing Cylinder	IntroductionThe dry cleaning and washing cylinder consists of a stainless steel rotary test chamber and a multi-speed drive with a digital timer.It...
	Wire Cut - through Tester for Ford Automotive Wires	Applicable Standard: Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA Technical Parameters: 1. Sens...
	Metal Wire Wrap Tester	According to the criteria: GB/T 2976 "Wire winding test method for Metal Materials" ISO 4101 Cold drawn steel wire for elevator wire ropes - Tech...
	Small Parts Tester	Test Procedure: Usage Methods and Interpretations Applicable standards: ASTM F963 EN 71-1 16 CFR Part 1501 ISO 8124-1 Product Advantages: Eff...
	Absorbable Bone - connecting Plates Four - point Bending Tester	Standard ASTM F2119: Standard test method for constant load testing of bioabsorbable screws and washers, applicable to bending performance evalu...

Same products

	Reliable Components for Water and Industrial Systems	Seller: 866507	The Stainless Steel Float Ball is designed for automatic liquid level control and fluid managem...
	Double Convex Lenses	Seller: Shandong Yanggu Constant Crystal Optics, Inc	Double Convex Lensesare used in image relay applications, or for imaging objects at close conjuga...
	Wedge Prism	Seller: Shandong Yanggu Constant Crystal Optics, Inc	Wedge prismis an optical element with plane-inclined surfaces, usually the faces are inclined tow...
	Ball Lenses	Seller: Shandong Yanggu Constant Crystal Optics, Inc	Ball Lensesare commonly used to improve signal quality in fiber coupling applications, or for use...
	KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery	Seller: Xin Tang Shallow Power Supply Co.,LTD	KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery Small Office & Retail UPS Backup Power Systems...