Car seat static strength tester
Applicable standards:
GB 11550-2009"Car seat headrest strength requirements and test methods" : This standard specifies the static strength test requirements and test methods of car seat headrest, which is suitable for the static strength test of car seat headrest.
GB 15083-2006"Strength requirements and test methods for car seats, seat fixtures and headrests" : This standard provides static strength test methods and requirements for car seats, seat fixtures and headrests, covering seat backs, seat cushions, headrests and other components.
Main parameters:
Load measurement range:The load measurement range of the tester is usually between （40 to 2000）N, depending on the model and configuration of the tester. This parameter determines the maximum and minimum loads that the tester can measure.
Load accuracy:Load accuracy is usually expressed as the percentage error of the measured value, generally around ±1%. This parameter reflects the accuracy and reliability of measuring load of the tester.
Load cylinder stroke:The load cylinder stroke refers to the maximum distance that the tester can move during the loading process, usually around 500mm. This parameter determines the range of loads that the tester can simulate.
Displacement accuracy and resolution:Displacement accuracy is usually expressed as a percentage error or absolute error of the measured value, while displacement resolution refers to the smallest change in displacement that the tester can detect. These parameters affect the accuracy and sensitivity of measuring displacement.
Angular displacement measurement and control accuracy:For test items that need to measure angular displacement, the tester should have sufficient angular displacement measurement and control accuracy, usually around ±0.01°. This parameter reflects the accuracy and stability of the tester when measuring angular displacement.
Sampling frequency:Sampling frequency refers to the rate at which the tester collects data during the test, usually around 1000Hz. The high sampling frequency ensures that the tester can capture more data points, which improves the accuracy and reliability of the test.
Equipment power supply:The tester usually needs a single-phase AC220V, 50Hz power supply, the power depends on the tester model and configuration.
Software functions:The tester is usually equipped with professional test software for controlling the test process, collecting and processing data. The software functions should include manually setting conditions to find the feature points of the curve, obtaining the slope between two points of any curve, scaling and moving the curve, exporting all test sampling points to Excel, etc.
Send product request
Other supplier products
 |
Bone Plates Static Four - point Bending Tester | Standard YY/T 0342-2022: Chinese standard specifying methods for determining bending strength and equivalent bending stiffness of straight and pre... |
 |
Falling Sand Abrasion Tester | Standards GB811-2022. GB24429 GB/T 38305 GJB1564A GA/T44. GA293 GA294 GA295 GA296 ASTMD968 ASTMD333 ASTMD1395 ASTMD2205 Main applicati... |
 |
Thermal Insulation Material Bond Strength Tester | Product Introduction: High-precision rivet drawing instrument products adopt S-type high-precision sensor, mechatronics design, a complete set of ... |
 |
G612 national standard shoe wear testing machine | Product Introduction: The whole shoe wear testing machine is used to test the wear resistance of soles and sole pieces. The principle is to press ... |
 |
Safety Helmet Lateral Rigidity Tester | Standard GB 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-2 (Industrial Safety Helmets – Lateral Deformati... |
Same products
 |
Reliable Components for Water and Industrial Systems | Seller: 866507 | The Stainless Steel Float Ball is designed for automatic liquid level control and fluid managem... |
 |
Double Convex Lenses | Seller: Shandong Yanggu Constant Crystal Optics, Inc | Double Convex Lensesare used in image relay applications, or for imaging objects at close conjuga... |
 |
Wedge Prism | Seller: Shandong Yanggu Constant Crystal Optics, Inc | Wedge prismis an optical element with plane-inclined surfaces, usually the faces are inclined tow... |
 |
Ball Lenses | Seller: Shandong Yanggu Constant Crystal Optics, Inc | Ball Lensesare commonly used to improve signal quality in fiber coupling applications, or for use... |
 |
KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery | Seller: Xin Tang Shallow Power Supply Co.,LTD | KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery Small Office & Retail UPS Backup Power Systems... |
