Seat Bumping and Creep Test Bench
This test bench is used for simulating the car seat bumping and creep situation when a car is running. This instrument can perform car seat bumping and creep durability test. The test result directly reflects the service life and safety coefficient of car seat under the condition of bumping and creep. The instrument is also can be used for testing the vibration isolation performance of car seat.
Standards
Seat Bumping and Creep Test Benchis used for simulating the car seat bumping and creep situation when a car is running. This instrument can perform car seat bumping and creep durability test. The test result directly reflects the service life and safety coefficient of car seat under the condition of bumping and creep.
Feature
·Hydraulic and electrical servo technology is used in this test bed to realize the vibration test of single seat and twin seat.
·It is able to realize up the and down bumpy movement of car seat, back and forth movement of the butt model and back model and the twist movement of the butt model and back model. It can perform any type of the three movements, any two types of the three movements or the three movements at the same time.
·The amplitude and frequency of all movements can be adjustable steplessly.
·The test bed can also measure the height of the seat cushion before and after the test.
Technical Parameters
| Items |
Parameters |
| Control system parameters |
Up and down max. amplitude and frequency value |
Amplitude ±20mm, frequency 1.5Hz; Amplitude ±5mm, frequency 7.5Hz |
| Horizontal max. amplitude and frequency value |
Amplitude ±50mm, frequency 0.5Hz |
| Rotatory max. amplitude and frequency value |
Amplitude ±30º, frequency 15cpm |
| Vertical movement hydraulic cylinder |
Up and down displacement stroke |
±50mm |
| Measurement accuracy |
±1% |
| Value resolution |
0.001mm |
| Horizontal movement |
Horizontal displacement stroke |
±75mm |
| Measurement accuracy |
±1% |
| Value resolution |
0.001mm |
| Rotatory movement |
Control accuracy |
±1% |
|
Rotation frequency |
30cpm |
| Acceleration sensor |
Max. acceleration |
50g |
|
Measurement accuracy |
±1.5% |
| Angel range |
±30º , measurement accuracy: ±1%. The Angle value resolution ,0.03º |
| System maximum bearing load |
500kg
|
Other supplier products
|
|
Fiber Crimp Elasticity Tester |
Product Introduction:
YG362C fiber crimp elasticity meter is used for crimp degree of 1-22dtex fiber.
Crimp elasticity, crimp recovery rate index... |
|
|
Heel Fatigue Tester |
Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel ti... |
|
|
Protective Clothing Resistance chamber |
Related Standards
GB/T 22042 - 2008 Clothing - Anti-static Performance - Test Method for Surface Resistivity
GB/T 22043 - 2008 Clothing - Anti-st... |
|
|
Washer and Dryer |
I. Product Overview
The Washer-Dryer Combo is a space-saving solution for automated laundry processing, combining washing and drying functions in ... |
|
|
Microscale Continuously Closed Cup Flash Point Analyzer |
Reference Standards：
SH/T 0768, SN/T 3077.1, DL/T 1354, ASTM D6450 SN/T 3077.2, ASTM D7094 GB/T 261, GB/T 21615, ASTM D93 GB/T 5208, GB/T 21790, A... |
All supplier products
Same products
