Chemical Equipment Titanium Tube
Catalogue of Titanium Seamless Tubing1. Product name: seamless tube,Website:, titanium pipe,2. Standard: ASTM B337/ASTMB338;ASTM B861 / ASME SB8613. Grade: Gr1, Gr2, Gr3, Gr4, Gr7, Gr9, Gr12Size of titanium tube· Capillary tube: OD: 12.7-115mm, Thickness: 0.5-5mm, Length: <13000mmApplication of titanium tube· Heat exchangers and condensers· All kinds of corrosive fluid transmission pipeline system· Titanium bicycle tube, automobile exhaust pipe· Offshore aquaculture· Chemical Equipment· Spectacles· Golf ClubMechanical properties in room temperatureDescription about Titanium gradesTitanium Grade 1-4 is pure Titanium, the other grades are alloys. Pure Titanium is used due to its high corrosion resistance, the alloys because of the extremely high strength to weight ratio.·Grade 1. Pure Titanium, relatively low strength and high ductility.·Grade 2. The pure titanium most used. The best combination of strength, ductility and weldability.·Grade 3. High strength Titanium, used for Matrix-plates in shell and tube heat exchangers.·Grade 5. The most manufactured titanium alloy. Exceedingly high strength. High heat resistance.·Grade 7. Superior corrosion resistance in reducing and oxidizing environments.·Grade 9. Very high strength and corrosion resistance..·Grade 12. Better heat resistance than pure Titanium. Applications as for·Grade 7 and Grade 11.·Grade 23. Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for surgical implant Applications.
Other supplier products
|
|
Corrugated Tube |
The corrugated tube presents a uniform helical deformation both internally and externally.This deformation creates an internal turbulence that allo... |
|
|
U BEND TUBE For Heat Exchanger |
U-Bend TubeU-bend tubes are widely used in heat-exchanger systems. Heat-exchanger equipment on the basis of seamless stainless U-tubes is essential... |
|
|
Chemical Equipment Titanium Tube |
Catalogue of Titanium Seamless Tubing1. Product name: seamless tube,Website:, titanium pipe,2. Standard: ASTM B337/ASTMB338;ASTM B861 / ASME SB8613... |
|
|
Honed Tubes For Hydraulic Cylinders |
Honed Tube,Website:, with standard DIN2391,EN10305-1/2,GB/8713,we manufacture from OD40mm to 800mm and length 14meter max. Our yearly capacity is 1... |
|
|
Drawn Over Mandrel Tubes |
Drawn Over Mandrel Tubes (DOM)Drawn Over Mandrel tubes according to tubing manufacturing standards like ASTM A513 type-5 & -6 or equivalent to meet... |
All supplier products
Same products
