Square Nuts
1.Technical Parameters and DrawingsHE CodeDimensionsWt./1000ΦDABCkgSN1/41/4"7/32"1/2"7/16"8.00SN3/83/8"21/64"7/8"5/8"11.79SN1/21/2"7/16"1 1/8"13/16"36.29SN5/85/8"35/64"1 3/8"1"47.17SN3/43/4"21/32"1 1/2"1 1/8"65.32SN7/87/8"49/64"1 3/4"1 5/16"136.08SN11"7/8"2"1 1/2"226.80Notes:1. Tolerance: ±5% 2. Material: carbon steel 3. Finish: hot dip galvanized 4. Customized sizes are available at request.2.Product Description:Square nuts are produced to use on a variety of bolt and stud hardware. Square nuts are compatible with all ANSI C135.1 hardware. Nuts are tapped oversize in accordance with ASTM A563 for proper fit on galvanized bolts.The above are typical only, please consult Shanghai Herrajes for further information.3.Product Details:Name: square nutsHS code: 7318151001Model: CSA, ANSI/ASME, DINPackage: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: carbon steel Q235Finish: HDGODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000 Minimum tensile strength lbs.: 10000For bolt dia. in: 1/4, 3/8, 1/2, 5/8, 3/4,etc.
Other supplier products
|
|
Meter Socket Sealing Ring |
1.Technical Parameters and Drawings HE CodeDescriptionThicknessmmSRS01Screw type sealing ring1.5Notes:1. Tolerance: ±5% 2. All dimensions are in M... |
|
|
Secondary Rack Pole Bands Single Type |
1.Technical Parameters and DrawingsHE CodeDescriptionPBS-1Secondary Rack Pole Bands Single TypeNotes:1. Tolerance: ±5% 2. All dimensions are in MM... |
|
|
Guy Wire Thimble Clevis |
1.Technical Parameters and DrawingsHE CodeDescriptionWt.Min failing loadkgkNGWTC-1Guy Wire Thimble Clevis0.570Notes:1. Tolerance: ±5% 2. All dimen... |
|
|
Clevis Eyes |
1.Technical Parameters and DrawingsHE CodeDescriptionDimensionsWt.Minimum failing loadABCΦDEFkgkNCE-1Clevis eye.770CE-2Clevis eye.7120CE-3Clevis ey... |
|
|
Ball Clevis Q-Y Type |
1.Technical ParametersNotes:1. Tolerance: ±5% 2. All dimensions are in MM except for marked. 3. Finish: hot dip galvanized per ASTM A153 4. Cust... |
All supplier products
Same products
