Guy Wire Thimbles
1.Technical Parameters and DrawingsHE CodeDescriptionWt./1000kgGWT3/8Guy wire thimble 3/8"37.2Notes:1. Tolerance: ±5% 2. All dimensions are in MM except for marked. 3. Customized sizes are available at request.2.Product Description:Guy wire thimbles are produced to provide a more desirable and larger wire seat diameter when terminating grips, deadend bails or cables to small diameter eye type fittings and bolts.Thimbles are usually attached to oval eye anchor rods or bolts, or clevises.Strand grooved to fit various rope sizes, and open end to slip over rods or eyes.Steel hot dip galvanized per ASTM A153.The above are typical only, please consult Shanghai Herrajes for further information.3.Product Details:Name: guy wire thimbles, open wire rope thimble, strand thimble, stay thimbles, guy thimbles, wire rope thimble strand thimblesHS code: 7326901900Model: Package: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: SAE1020Finish: hot dip galvanizedODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000 Strand dia. In.: 3/8Steel thickness MM: 2.8
Other supplier products
|
|
Round Eye Bolts |
1.Technical Parameters and DrawingsHE CodeDimensionsWt. kgABCEDia. ΦDEBR1/2-66" (152.4)4" (101.6)1 1/4"(31.8)11/16"(17)1/2(12.7)0.18EBR1/2-88" (203... |
|
|
Lag Screw Pins |
1.Product Description:Lag screw pins are produced for pole and transformer wiring.Forged steel, hot dip galvanized.1" cast lead thread.T he above a... |
|
|
Flat Crossarm Braces |
1.Technical Parameters and DrawingsHE CodeDimensionsWt./100kgsABCECBF14-2626" (660.4)24" (609.6)1/4" (6.35)1 1/4"(31.75)104.33CBF14-2828" (711.2)26... |
|
|
Pole Top Brackets |
1.Technical Parameters and DrawingsHE CodeDimensionsWt. kgL1WTL2Hole ΦD1Slot ΦD2Hole spacingPTB11/1610 1/2"3"1/4"1 1/4"11/16"11/16" x 1 1/4"8"1.72N... |
|
|
Crossarm Corner Pins |
1.Technical Parameters and DrawingsHE CodeCCP-011. Tolerance: ±5% 2. All dimensions are in MM3. Material: carbon steel 4. Finish: hot dip galvani... |
All supplier products
Same products
