Multilayer geotextile single-layer thickness tester丨IS0 9863
Meet the standard
GB/T17598-1998. GB/T 13761.1-2022. JTG E50-2006. IS09863-90
Scope of application
The multi-layer sample is mechanically separated and the thickness of each single layer of the sample is measured under the specified pressure
Instrument features
Thickened upper and lower rectangular plate, can withstand large pressure without deformation;
Straight sliding copper sleeve, smooth plate movement, to ensure the parallelism of the upper and lower plates;
Hand-operated lifting mechanism, maximum force value 1.8T, stable force value, can be fixed on any stroke,
Digital display measuring calipers for easy reading.
Standard configuration
1. One host
2. 1 vernier caliper
3. 1 special wrench
4. Product packing list 1 copy
5. 1 copy of product manual
6. Product tag certificate 1 copy
Technical parameters
Rectangular plate thickness 30mm
Travel 0——120mm
Maximum pressure 300kPa
Measuring range 0——200mm
Index value 0.01mm
Point wire φ0.05mm, length 20mm
Isolation plate thickness 2mm
Dimensions: 430*210*510mm
It weighs about 80kg
Send product request
Other supplier products
 |
Shoelace Abrasion Tester / SATRA TM93 | Application: This shoelace abrasion tester is used for shoelace against standard eyelet abrasion testing, or eyelet against standard shoelace abra... |
 |
Gloss Meter ASTM D523 | Standard The SpectroColor Pro S Series Gloss Meter adheres to stringent automotive interior quality control standards, includingISO 2813. ASTM D52... |
 |
Shoe peeling strength tester BS 20344 | Product Introduction: Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the p... |
 |
Geotextile Effective Aperture Tester丨Geotextile Test Machine | Scope of application: The equivalent pore diameter of geotextile and its related products was determined by dry screening method. The geotextile s... |
 |
Geomembrane Texture Height Tester丨Precision Tester for Geomembrane Texture | Meet the standard CJ/T 234- Appendix F-2006.ASTM D7466/D7466M-23 Instrument features Design and manufacture according to the standard, in line w... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
