Safety Glass Impact Test Device - Headform Impact Test Device
Safety Glass Impact Test Device - Headform Impact Test Device
Related Standard:
ISO 3537 Road vehicles –Safety glazing materials — Mechanical tests – Clause 10 Head-form test
Principle: Assessment of the minimum strength and cohesion of the safety glazing material under impact from a blunt, bulky object. If required, tests can be performed on whole windscreens.
Application:
The purpose of this test is to verify the compliance of glazing with the asking relating to the limitation of injury in the event of impact of the head against the windscreen, laminated glass and glazing of glass-plastic and rigid plastic other than windscreens, together with The double-glazed units used in the side windows.
Technical Data:
Head-form Weight: 10kg
Head-form Size: 500mm*932mm
Impact height: < 1.5m
Samples size: 1100mm*500mmw
Felt hat: 90g/89mm Thickness:5mm
Frame size: 1376mm*670mm*320mm
Apparatus:
Head-formweight, with a spherical or semi-spherical head made of laminated hard wood covered with replaceable felt and without a cross-beam made of wood. Between the spherical part and the cross-beam, there is a neck-shaped intermediate piece and on the other side of the cross-beam, a mouning rod.
The total mass of the apparatus shall be 10 kg±0.2 kg
Supporting fixture:
for testing flat test piece, the fixture is composed of two steel frames, with machined edges, 50mm wide, fitting one over the other and faced with rubber gaskets 3mm±0,5mm thick and 15mm±1mm wide, of hardness 70 IRHD.
The upper frame is pressed against the lower frame by at least eight bolts. The support shall rest on a rigid stand with a sheet of rubber, of hardness 70 IRHD and 3mm±0,5mm thick, placed in between.
Send product request
Other supplier products
 |
Leather Bag Impactor 45Kg/ 46Kg | Leather Bag Impactor 45kg/46kg Function: Used as impactor for tempered glass and laminated glass shot bag impact test Related Standards: 1) AS/NZS ... |
 |
Soft Body Impactor 50 Kg NF F 01-492 | Standard Name: Insulating glass used on multiple units Reference Standard: NF F 01-492Clause 10.8 and 16.8 Technical Data: Weight: 50kg Height: 600... |
 |
Tempered Glass Flatness Measure | Function: Measurement of arcuate form and wave form of tempered glass Related standard: 1) GB 15763.2 Safety glazing materials in building &ndas... |
 |
Flatness Meter(Measuring Span 500 mm) | Flatness Meter (Measuring Span 500 mm) Function: Measurement of arcuate form and wave form of tempered glass Related Standard: 1) GB 15763.2 Safety... |
 |
Machine equipment fence | Name: Machine equipment fence, equipment safety fence, automation equipment isolation net, industrial equipment robot fence Material: Q235 Dimensio... |
Same products
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | Seller: Qinsun Instruments Co., LTD | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
