PV Module Impact Test Equipment
PV Module Impact Test Equipment
Related Standards:
- IEC 61730 Impactor and Impact Test Frame
- 45 kg impactor and 1525 mm * 2480 mm impactor frame for IEC 61730
Apparatus:
- The impactor should be a bag made of suitable material and capable of being filled to the required weight with suitable filling materials (such as steel balls or pellets).
The outside of the bag should be wrapped with tape. When filled, the size of the impact bag should be as shown in the figure below, and the weight should be 45.5 kg + 0.5 kg. The ratio of the widest diameter to the height is between 1:1,5 to 1:1,4.
- The test frame similar to the figure below will not minimize movement and deformation during the test. The structural frame and support should be steel channels (approximately 100 mm x 200 mm or larger). The frame should be welded or bolted firmly at the corners to minimize distortion during impact. It should also be bolted to the floor to prevent movement during the impact test.
IEC 61730-2 Photovoltaic (PV) Module Safety Certification-Part 2: Test Requirements 10.21 Module Break Test MST 32
Send product request
Other supplier products
 |
IG Dew Point Meter | Function: Measuring dew point meter of insulating glass Related Standard: ISO 20492 Glass in buildings — Insulating glass GB / T 11944 Ins... |
 |
Galvanized Sheet Hoop /C Type Clamp Pipe Clamp /Power Clamp/ Bending Mold Processing | Galvanized sheet hoopC type clamp pipe clampPipe clampPower clampBending mold processingFunction: communication, fire fighting, electric power, wat... |
 |
Steel Ball Impact Tester | Steel Ball Impact Tester Function: Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact fr... |
 |
227 g/508 g/1040 g/2260 g Steel Ball Impact Test For Laminated Glass | 227 g/508 g/1040 g/2260 g Steel Ball Impact Test For Laminated Glass Function: Determination of whether the safety glazing material has a certain m... |
 |
Glass and alzing Products Testing Machine | Impact Testing Equipment Testing Machine for Mechanical Properties of Tempered Glass Shot Bag 1)Weight:45kg±0.1kg 46kg±0.1kg 2)Heigh... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
