Pneumatic Bump Test Equipment
KRD20 series pneumatic bump test machine replaces the traditional mechanical cam-type crash bench and is suitable for repeated impacts on electronic components, equipment and other electrical and electronic products during transportation or working.
l Fully pneumatic driven, clean and environmentally friendly, good repeatability and high reliability.
l Control the frequency of collisions by adjusting the gas pressure to achieve continuous high-frequency collisions.
l Test time and collision frequency can be set arbitrarily, and it will stop automatically after the test is completed
l The controller has door protection, over speed protection and zero signal protection to ensure the safety of the system.
l The drop height is adjustable, only need input the overload value; adaptive adjustment of the collision process to ensure the repeatability.
Technical Specifications
Model Parameters |
KRD 20-50 |
KRD 20-100 |
KRD 20-200 |
KRD 20-500 |
KRD 20-800 |
KRD 20-1000 |
KRD 20-1500 |
KRD 20-2000 |
KRD 20-3000 |
Load (kg) |
50 |
100 |
200 |
500 |
800 |
1000 |
1500 |
2000 |
3000 |
Table Size (mm) |
500×500 |
600×600 |
800×800 |
1000×1000 |
1500×1500 |
1800×1800 |
2000×2000 |
2500×2000 |
2500×2500 |
Shock Waveform |
half sine wave |
||||||||
Peak Acceleration (g) |
3~150 |
3~120 |
3~100 |
3~80 |
4~60 |
5~50 |
5~50 |
5~40 |
5~30 |
Pulse Duration (ms) |
2~30 |
3~30 |
5~30 |
6~30 |
6~30 |
8~30 |
11~30 |
||
Bump Rate (Times/Min) |
1~120 |
1~120 |
1~100 |
1~100 |
1-80 |
1~60 |
1-30 |
1-20 |
|
Overall Dimension (mm) |
1050×1050 ×1300 |
1050×1050 ×1300 |
1100×1100 ×1300 |
1200×1200×1500 |
1300×1300×1600 |
1350×1350×1600 |
2000×2000×1850 |
2500×2000×1950 |
2500×2500×2100 |
Weight (kg) |
1500 |
1500 |
2000 |
2500 |
2500 |
7500 |
8500 |
9500 |
11000 |
Power Supply |
AC220V ± 10%,50Hz |
||||||||
Air Source |
≤0.8Mpa |
||||||||
Working Environment |
Temperature range 0 ~ 40℃; Humidity ≤ 80% non-condense |
||||||||
Standards |
MIL-STD-810F IEC68-2-29 |
Send product request
Other supplier products
KRD61 6-DOF Simulation Table | KRD61 series 6-DOF simulation table is a closed-loop servo simulation platform consisting of six servo actuators and six sets of dedicated hinges c... | |
Pneumatic Bidirectional Vertical Shock Testing Machine | KRD17 series pneumatic bidirectional vertical shock test system is the new designed and developed for some large specimens that cannot or are not e... | |
KRD102 Clamping Force Tester | KRD102 series clamping force tester is an indispensable test method for improving products into high-quality fields. It is suitable for research, d... | |
Clamping Force Test Machine | KRD102 series clamping force tester is an indispensable test method for improving products into high-quality fields. It is suitable for research, d... | |
KRD01 Series Electro-Dynamic Shakers | KRD01 series is an air-cooled electric vibration test system, with advantages of wide frequency, excellent performance, high reliability, small foo... |
Same products
BS EN 12600 Two Tyres Impactor | Seller: Qinhuangdao Yuanchen Technology Equipment Co., Ltd. | Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m... | |
Hast Pct High-Low Temperature Test Chamber with Pressure | Seller: AI SI LI (China) Test Equipment Co., Ltd. | HAST PCT High-low Temperature Test Chamber With Pressureis widely applied to the testing of seali... | |
Programmable Hast Accelerated Aging Tester for Industry | Seller: AI SI LI (China) Test Equipment Co., Ltd. | HAST (Highly Accelerated Stress Test) is a type of test that is used to evaluate the reliability ... | |
CE Certificated Lab Equipment Transport Vibration Tester for Un38.3 Standard | Seller: AI SI LI (China) Test Equipment Co., Ltd. | CE Certificated Lab Equipment Transport Vibration Tester for UN38.3 Standardis applied to test th... | |
Package Large Scale Simulation Transportation Vibration Tester | Seller: AI SI LI (China) Test Equipment Co., Ltd. | This machine is used to simulation testing damage between transport for various package stuff, PC... |