Salt Mist Test Chamber(Salt /Temperature /Humidity)
Feature
1. Structure of Salt Mist Test Chamber: with enclosure is a fully anti-corrosion structure, made of multi-layer fiberglass reinforced polyester resin, and constructed with corrosion-resistant materials.
2. Unique design: Large spraying area and high flow rate, resulting in shorter spraying time compared to fogging the solution under salt spray function.
3. Custom nozzle: Specific nozzles evenly spray the solution onto the test sample, and the solution flow rate can be adjusted.
4. The nozzle is installed on an independent module, making it easy to remove when fogging function is enabled.
5. Programmable touch screen controller allows for operation in both Chinese and English, and enables data collection.
6. Standard test specimen racks are provided, capable of accommodating flat samples. For oversized and heavy three-dimensional samples (such as automobile hubs and engine components), grid kits with the same height as the support can be used. The enclosure is structurally robust, allowing for even distribution of the load.
7. The spray on/off time can be programmed directly to better control the corrosion rate. If you need more models about our test equipment, please reference our ： chamber-testing（Click）com
Meet standard:
DO160 E/F/G Salt spray test requirements
GB/T 20854-2007/ISO14993-2001
Accelerated testing of corrosion cycles of metals and alloys exposed to salt spray, "dry" and "wet" conditions
GB/T24195-2009/ISO 16151:2005 Cyclic accelerated corrosion tests under acid salt spray, dry and wet conditions
GJB 150.11A-2009 Military equipment laboratory environmental test method salt spray test
GB/T 2424.17-2008/IEC60068-2-11:1981 Salt spray test method
GB/T 2423.18-2012/IEC 60068-2-52: 1996 Alternating salt spray test method for sodium chloride
GB/T 2423.3-2006/IEC Test cab: constant wet heat test method
GB/T 10125-2012/ISO9227-2006
Send product request
Other supplier products
 |
Metal material simulation humidity chamber | The humidity test chamber, often referred to as an environmental test chamber or a constant temperature and humidity chamber, is a device that can ... |
 |
Low-pressure temperature and humidity test chamber | Designed to simulate and evaluate the reliability of electrical/electronic products, instruments, and industrial equipment under combined environme... |
 |
Fast temperature change test chamber | The working principle of the rapid temperature change test chamber is to simulate external environmental changes through physical cooling and heati... |
|
|
Salt Mist Test Chamber(Salt /Temperature /Humidity) | Feature1. Structure of Salt Mist Test Chamber: with enclosure is a fully anti-corrosion structure, made of multi-layer fiberglass reinforced polyes... |
 |
Aircraft material simulation temperature, humidity and low-pressure test chamber | The low-pressure test chamber can simulate various low-pressure conditions ranging from sea level to high altitudes by controlling the pressure ins... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
