Timken Test Machine
Testing Standards
ASTM D 2509
ASTM D 2782
GB/T3142
SH/T0204
Applicable standards
Timken extreme pressure friction testing machines are usually tested in accordance with the following standards and specifications:
ASTM D2509: This is a standard developed by the American Society for Materials and Testing (ASTM) to evaluate the performance of lubricants and lipids under extreme pressure conditions. The test methods and results evaluation of Timken testing machines shall be carried out in accordance with this standard.
ASTM D2782: Also developed by ASTM to evaluate the performance of certain types of lubricants under extreme pressure conditions.
Other relevant standards; Depending on the specific application area and test requirements, other relevant standards and specifications may also be involved. For example, in China, the testing of the Timken testing machine may also require compliance with relevant national standards such as GBT or industry standards.
In addition, different types of Timken testing machines may have different technical parameters and scope of application, so before testing, you should carefully read the equipment manual to understand the specific performance and test requirements of the equipment to ensure the accuracy and reliability of the test results.
Main uses
Alemken extreme pressure friction testing machine is mainly used to evaluate the extreme pressure performance and abrasion resistance of various tear oil and grease, etc. Its specific uses include but are not limited to:
Evaluating the extreme pressure bearing capacity of lubricating media: The Timken testing machine can evaluate the bearing capacity of lubricating media such as lubricating oil and grease under extreme conditions by simulating the friction and wear process under extreme pressure conditions. This is of great significance to the research and specification of industrial oils and fats.
Distinguish the performance of EP additives: Through the test of Timken testing machine, it is possible to distinguish the low, medium and high extreme pressure performance of different EP(extreme pressure) additives, which provides a scientific basis for the optimization of lubricant formulation.
Material properties research: In addition to lubricating media, Timken testing machine can also be used for a variety of coatings, coatings, metal, non-metal and other materials performance research, especially their wear resistance and friction coefficient.
Technical data
Test load 10.000 N
Automatic loading 0.9 to 1.3 kg/s (pneumatic)
Speed 1 - 800 rpm, variable
Temperature up to 120°C
Grease feeder 45 g/min
Feeder 3.8 liters (circulation pump and heater)
Test sample (block) 123 mm x 123 mm x 123 mm
Test sample (ring 12 mm x 12 mm x 12 mm (diameter) x 12 mm (width)
Send product request
Other supplier products
 |
Elastic Tape Fatigue Testing Machine | This instrument is used to test the elasticity of elastic belt after reciprocating movement. Application Elastic Tape Fatigue Testing Machineis u... |
 |
Photovoltaic module wire tube bending testing machine | The Photovoltaic Module Wire Tube Bending Testing Machine is designed to evaluate the mechanical durability and fatigue resistance of PV module out... |
 |
Keyboard Key Durability Testing Machine (for Keyboard Key Life Testing Machine) | Product Introduction Key life testing machine can be used to test the life of mobile s, MP3. computers, electronic dictionary keys, remote control... |
 |
Material Friction Stick-Slip Noise Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application (1) Automotive interior materials: evaluation of friction performance on seat ... |
 |
Flame spread index testing equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can apply this tester in the following scenarios: Building materials eval... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
