Helmets Vertical SpacingInfrared - positioning Tester
Purpose
This measuring instrument is used to measure the vertical spacing and wearing height of safety helmets.
Applicable Standard
GB/T 2812-2006
GB 2811-2019
EN 397
Technical Parameters
1. Digital height gauge, which can display the height in real - time, with a measuring range of 0 - 500mm. 2. Adopts infrared positioning. 3. First, wear the test sample on the standard - specified head mold according to the standard requirements, and adjust it to make the heights on both sides of the hat hoop consistent. 4. Measure the vertical distance from the lowest point of the bottom edge of the hat hoop on the side of the sample to the top of the head mold as the wearing height, record the measured value and be accurate to 1mm. 5. Measure the vertical distance from the position of the point on the edge of the minor axis of the helmet shell relative to the head mold to the top of the helmet shell as X1. 6. Remove the wearing system and cushioning liners, place the sample on the head mold again, and ensure that the posture of the helmet shell is the same as before removal.
7. Measure the vertical distance between the same points as X2.
Send product request
Other supplier products
 |
Carpet hair removal measurement device | Standard ASTM D5417(Standard Test Method for Quantifying Loss of Fiber from Carpets) ISO 10362(Textile Floor Coverings - Determination of Fiber... |
 |
20L Spherical Explosion Tester | Product Description: 20L Spherical Explosion Tester is characterized by accurate test data and ease of use. Its through the compressed air will be... |
 |
Rubber Mooney Viscosity Test machine | Test principle: The Mooney viscometer is used to measure the viscosity of rubber under specific conditions. In the test, the rubber sample was loa... |
 |
Automatic Reaction Calorimeter | Product Features： 1. It offers three calorimetry methods: heat - flow, power - compensation, and reflux, allowing users to choose according to the... |
 |
Photovoltaic module outdoor exposure test system | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61730: Photovoltaic (PV) Module Safe... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
