Helmet Xenon Aging Tester

Standards

GB/T2014-9-19. ISO 4892

ASTM G151. G154. D4329

d4587、d4799、sae j2020

Xenon lamp aging test box structure

1. the box is molded by CNC machine tool processing, beautiful and generous shape, the lid is two-way flip type, easy to operate.

2. the inner liner is made of imported stainless steel plate, the outer liner is sprayed with A3 steel plate, which increases the appearance of texture and cleanliness.

3. heating mode for the inner liner sink heating, warming fast temperature distribution.

4、Drainage system using back to the vortex type and U-type sedimentation device drainage, convenient for users to clean.

Helmet xenon lamp aging test chamber applications

Xenon lamp aging test chamber, also known as xenon arc lamp aging test chamber, the application of a wide range of industries, such as: coatings ink paints, resins, plastics, printing and packaging, adhesives, automotive and motorcycle industries, cosmetics, metals, electronics, electroplating, pharmaceuticals, etc. Xenon arc lamp aging test chamber can quickly and realistically reproduces the sunlight, rain, dew on the materials of the damage: it takes only a few days or a few weeks Q8 to reproduce outdoor need months or years To produce damage: including fading, discoloration, brightness loss, chalking, cracking, blurring, embrittlement, strength loss and oxidation.

Xenon lamp aging test chamber features

1. the specimen installation thickness can be adjusted, the specimen is fast and easy to press and install.

2. the upward rotating door does not hinder the user to operate the equipment, only occupies a small space.

3. unique condensation system using ordinary tap water can meet the requirements.

4、Water heater is under the container, not immersed in water, long life, easy maintenance.

5、Water level control is placed on the outside of the UV box, easy to monitor.

6. the equipment has casters, easy to move, casters are standard accessories.

8、Computer programming is convenient, misoperation and fault automatic alarm. Light intensity programmable

9. there amplitude illumination calibrator calibration can extend the lamp life (longer than 1600 hours).

9. there are Chinese and English manual, easy to access.

10. divided into ordinary, light amplitude illumination control type, spray type.

Xenon lamp aging test chamber technical parameters

1. the condensing device simulates the effect of outdoor humidity, the humidity can be achieved

2. there is an electronic eye irradiance control system

3. through the blackboard temperature sensor to measure the temperature accurately, can be repeated to reproduce the test results

4、Humidity, condensation, water spray can cycle continuous test

5. amplitude illuminance with CR-10 calibrator traceability and automatic calibration procedures

6. the number of test samples: 75mm × 300mm samples 24 75mm × 150mm samples 48 pieces

Xenon lamp aging test chamber control system

1. light and condensation of independent control time and alternate cycle control time can be set arbitrarily within 999h.

2、French “Schneider” components, Philips rectifier and starter (to ensure that each boot can light up the ultraviolet lamp).

3、Using black aluminum plate to connect the temperature sensor, using the blackboard temperature, instrument control heating, temperature is more stable.

4、Radiometer probe adopts fixed type, without loading and unloading every time.

5. radiation using high-precision display and measurement of ultraviolet irradiance meter.

6. light and condensation can be duly controlled can alternate cycle control.

Other supplier products

	Spectral Density Analyzer	Standard The SpectroDensitometer YD5000 complies with international standards includingISO 5-4.CIE No.15. andISO 13655. ensuring reliable and stan...
	Direcct flame impingement Tester with BS 476-12	Introduction: The testeris designedaccording to the BS476-12:1991.Method of test for ignitability of products by direct flame impingement.The accu...
	JIS Rubbing Colour Fastness Tester	This rubbing color fastness tester is a standard testing machine of the Type II rubbing tester (GAKUSIN TYPE) specified in JIS L0849Test Method o...
	Face Mask Tensile Strength Testing Machine (for Face Mask Tensile Tester)	Introduction: The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ...
	Bone Plates Four - point Bending Fatigue Tester	Standard YY/T 1503-2016: Chinese standard specifying test methods for bending fatigue properties of metallic bone plates, requiring 1 million cy...

All supplier products

Same products

	FH-77 Dissolved hydrogen meter	Seller: Kelilong Electron Co.,Ltd	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Seller: Standard International Group (HK) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Seller: Standard International Group (HK) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Seller: Standard International Group (HK) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...